EuroReef Club

JohnL · #1 04/26/2006, 08:47 AM

This thread was automatically split due to performance issues. You can find the rest of the thread here: http://archive.reefcentral.com/forum...02#post7250602

ziac · #2 04/26/2006, 08:47 AM

asmodeus

i would leave the gate vale so you can adjust the skimmer to run wet or dry

marcoral · #3 05/06/2006, 02:07 PM

hello
somebody has had experiences with the Euro reef cs-80, is recommendable for a aquarium of 40gal, or are better the ASM G1X or the Remora Pro

thanks for your answers

jeffreylam1132 · #4 05/08/2006, 09:43 AM

In the market of buying one. Does anybody know where I can buy one for the best price? Thanks.

Lunchbucket · #5 05/08/2006, 10:05 PM

i used an ES5-2 and the new RC80. they work great. they are better built then the ASM's. i'd get the ER anyday!

h2otropicals.com or www.premiumaquatics.com

Lunchbucket

fishaholic911 · #6 05/08/2006, 10:15 PM

I have a euro and a asm both work the same but I will agree the euro is built better.If money is an issue go with asm they work great if you want bragging rights go with a Euro

clkwrk · #7 05/08/2006, 10:19 PM

Heres er and asm side by side looking the same to me and with an air meter they pull the same amount of air.Only real performace difference is the er is 8 inches while the asm is 6 wide

ER is built better.

JFish180 · #8 05/09/2006, 02:41 AM

I have an 8-2 that I just upgraded the Sedra 5000 pump to a GenX4100 (SP4). The pump did not come with the air line, so I used the one off the Sedra 5000. The problem is that it is trying to suck so much air that the tube makes a loud whine all the time. Also, skimmate production is worse than before replacing the pump. Does anyone know if the GenX4100s use a larger inside diameter air line tubing than the Sedra 5000s? If so, where could I get the replacement hose?

240-Reefer · #9 05/09/2006, 07:17 AM

I just joined the Euro Reef club with my new RC500. Some sorry sucker is going to buy old ASM

Lunchbucket · #10 05/09/2006, 07:28 AM

240 - a RC500!!!! where are the picks!!

Lunchbucket

240-Reefer · #11 05/09/2006, 08:52 AM

Comming soon!!

david8956 · #12 05/09/2006, 11:23 AM

I'm having an issue with my "older" ES 6-1 (almost 2 1/2 years old). Bought it new, it has always worked great but lately seems to be making less bubbles / foam, almost like it isn't getting enough air. Impeller was replaced about 6 months ago, entire skimmer is cleaned every month and pump soaked in vinegar. This morning I cleaned the cup again, and made sure there was nothing obstructing the air flow. (If I put my finger over the end of the air tube the suction doesn't seem as strong as I remember it being in the past)
There is an obvious line between the bubbles in the top 1/2 of the cup, and the mostly water with a few bubbles in the lower 1/2 of the cup. (Hard to see in the photo, indicated area with red lines)
[IMG]

[/IMG]

Do the pumps themselves just wear out within this time frame ? (It's a Sedra 3500) Any other suggestions ? Thanks.

(By the way - I add nothing to the tank except Randy's 2 part. No new additions, epoxy, etc. I can pretty much rule out anything in the water causing this)

powdertang05 · #13 05/09/2006, 07:47 PM

im thinking about throwing my ASM away and getting a rs80 or a rc80 for my heavy load 40gal what are you thinking will it work is it ok with SPS as far as over skimming?

240-Reefer · #14 05/09/2006, 07:49 PM

Quote:

Originally posted by powdertang05
im thinking about throwing my ASM away and getting a rs80 or a rc80 for my heavy load 40gal what are you thinking will it work is it ok with SPS as far as over skimming?

Thats what I just did, You wont regret it Got rid of my 4x for a RC500

fishaholic911 · #15 05/09/2006, 08:23 PM

If you are throwing the ASM's away let me know where.I will say it again I own both and do not see any differance in performance

smcdonn · #16 05/09/2006, 09:14 PM

I'll tell you what. If I turn my head one more time to look at that picture fishaholic, I'm gonna murder someone. It so true though
Anyways

to the euroreef. bought a blem from h20tropicals. havent got it running yet but looks like an awsome unit

Alaskan Reefer · #17 05/10/2006, 01:41 AM

I want a pic of the RC500!!!!!!!!!!

powdertang05 · #18 05/10/2006, 05:51 AM

well its a AMS mini it has a very under powered pump genx1000 im thinking of upgrading it so i can get better performance what do you think or should i just forget it and get a euroreef

Charlie Davidson · #19 05/10/2006, 09:37 AM

What do the n/w's in the new SP4 and SP5 pumps look like? Are they bicycle spoke design or pinwheel (like sedras)

euroreef · #20 05/10/2006, 09:43 AM

Charlie,

They are Pinwheel style.

euroreef · #21 05/10/2006, 09:44 AM

David8956,

I suggest you try reaming out the Venturi with a drill bit that JUST fits inside the Venturi hole. I believe 1/8" will do the trick. If you don't see an increase in performance, I suggest you consider replacing the impeller assembly or at least the magnet. If you have not tried soaking the impeller kit in PURE vinegar, try that for 24hrs and see if it helps. If there is ANY build up of Calcium Carbonate on the shaft or bearings it will affect pump and thus skimmer performance.

euroreef · #22 05/10/2006, 09:47 AM

clkwrk,

You can do a mod to your 8-2 that will improve it's performance. You can also upgrade the pump to the new SP4 and it will more than double the current air intake and performance.

euroreef · #23 05/10/2006, 09:50 AM

JFish180,

You need to get a new airline hose. The old style has a smaller ID and will do just what you describe as well as limit the air intake causing the pump to pump draw less air, more water and thus create more turbulence which will decrease skimming efficiency. Any of our dealers can order you a new airline kit which includes a control valve.

Charlie Davidson · #24 05/10/2006, 10:04 AM

Man that quick! Thanks, I call that customer service!!! Do you guys sell the n/w to go into the gen-x 6000?

euroreef · #25 05/10/2006, 10:07 AM

Yes. SP5 is the name for the ER modified GX6000 pump and associated parts. You can get these parts from any dealer anytime.

BTW, I just happened to be on and see your post and I am happy to help. I am not always on or able to reply, but I will do what I can.

Our customer support dept is always available M-F 9am to 5pm PST at 949-215-0849, toll free for registered warranty holders at 1-877 HEY-EURO!