|
#1
|
|||
|
|||
MH/PC pendant for 29g
Hey Lighting gurus,
I just bought an AGA 29g (30x12x18 ) this past weekend (upgrade from my 12g). I'd like to keep SPS, clams, and some softies so I've been looking at the MH options. It seems from reading through the forum that a 175W MH/PC pendant would be a good choice and was wondering if anyone had recommendations on Manufacturer/model. I was considering the CSL prism pendant, but it's only 17.5" long and my tank is 30" long. It seems this would prevent a nice uniform distribution of light. Would this be a good or bad thing? Any other recommendations/opinions? Thanks much for any feedback. Randy
__________________
29g AGA 250W Hamilton 2x75W URI actinic Remora skimmer CPR Aquafuge 35 lbs LR 40 lbs LS |
#2
|
|||
|
|||
Thanks for all the replys.
__________________
29g AGA 250W Hamilton 2x75W URI actinic Remora skimmer CPR Aquafuge 35 lbs LR 40 lbs LS |
#3
|
|||
|
|||
If I were you, I'd add a 250w German 10k with VHO actinics in a retro hood using PFO products and IceCap products. Such as a pair of IC fans, and IC E-ballast for the MH, and PFO ballast for the VHO, and a VHO reflector.
Also, I wouldn't use a cocky phrase to bump my thread if I were lloking for replys. Better luck next time, ace. |
#4
|
|||
|
|||
Actually, I had no idea my reply would bump it to the top again. Just thought it would keep getting buried deeper and deeper. Sorry guys.
Randy
__________________
29g AGA 250W Hamilton 2x75W URI actinic Remora skimmer CPR Aquafuge 35 lbs LR 40 lbs LS |
#5
|
|||
|
|||
I'd highly recommend a 150w Giesemann Nova II. I just put two 250w on my 58g. NICE!
__________________
Regards, Art Change your thoughts and you change your world. |
#6
|
|||
|
|||
Hello, I just put a Reef Optics I pendant over my 29 gallon with a 400w Radium bulb. It uses a Bluewave 400w ballast.
__________________
How much deeper would the ocean be without sponges |
|
|