|
#1
|
|||
|
|||
oil on the water
My water is clear and the tests are all good but i seem to have a layer of oil or scuzz floating on the water. My setup is a 55 gallon with 60 lbs LS 75 lbs LR a seaclone and an Emperior 400 and a couple of powerheads(rio 600). What can i do to get rid of this trouble. I do water changes every 2 weeks about 20%.
Richard |
#2
|
|||
|
|||
First do a search on rio pumps!!!!!!
Then add some type of surface skimmer or an airline in the tank will also clear up the surface film
__________________
Richard |
#3
|
|||
|
|||
You probably don't have sufficient surface movement. Maybe add another powerhead, and point it to the surface. I had the same problem with my 55 reef, and adding a powerhead, pointed to the surface helped.
|
#4
|
|||
|
|||
the rios were a bargian at the time and i am planning on an upgrade. What would you recomend for a surface skimmer? I will point a PH up towards the top and try that.
Thanks Richard |
#5
|
|||
|
|||
surface agitation will take care of a lot of it.
__________________
**************** Get crazy with the cheez whiz... I didn't mean to take up all your sweet time Give it right back to you....One of these days |
|
|