|
|
|
|
#1
11/12/2007, 06:24 PM
|
|||
|
|||
|
RO/DI Problem
FOr some reason no waters coming out of it. There is water coming out of the waste line. AAny suggestions ?
|
|
#2
11/12/2007, 06:28 PM
|
|||
|
|||
|
How old are the filters? Do you have a psi gauge? what does it read? Flush valve?
just trying to get a little more info. |
|
#3
11/12/2007, 06:52 PM
|
|||
|
|||
|
Does the unit have a flush valve, and if so is it in the open position? Thats a pretty common problem.
|
|
#4
11/12/2007, 06:54 PM
|
|||
|
|||
|
no I dont have a flush valve at least I dont think I do. I am thinkin that it is the RO being clogged its a year old but i wanted to throw it up on here incase someone else has had this issue and could share some light on it
|
|
#5
11/12/2007, 07:01 PM
|
|||
|
|||
|
Has it not been used and the membrane was allowed to dry out? Has the flow restrictor on the waste line been removed? Has your water pressure changed? How long has it been since the prefilter and carbon were changed?
Try putting your finger over the waste line or kink it a little and see if water starts to come out of the good water line. Or try removing the prefilter and run it without it for a few minutes to see if the filter is clogged. Try the same with the carbon but just for a short time so chlorine does not damage the membrane. |
|
|
Linear Mode
