|
#1
|
|||
|
|||
Skimmer Air inatke, is that the only factor ?
Skimmer Air intake, is that the only factor (or the main factor)?
Can skimmer like ATI bubblemaster can be compared to REEFLO ORCA 250 ? both of them have something like 2000 l.h air intake ? |
#2
|
|||
|
|||
No...
Its not the main factor at all. The reeflo will perform better for many different reasons. |
#3
|
|||
|
|||
Turbulence, height, water throughput, the path that the air and water have in relation to each other... etc.
__________________
"If at first, the idea is not absurd, then there is no hope for it" -Al Einstein |
#4
|
|||
|
|||
hahnmeister
can you provide more explanations. How does things can be measured ? |
#5
|
|||
|
|||
Hans, You forgot dwell time. Heat from the pump could also be a factor.
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
#6
|
|||
|
|||
at macna The Reeflo and the ATi were set up on a display the Reeflo is much better design...
the bubble plate is lower in the reeflo and the skimmer is taller for more dwell time less turbulence and the height would make a huge difference. |
#7
|
|||
|
|||
Quote:
I also believe there was a big thread on this forum about this same topic. |
#8
|
|||
|
|||
Quote:
|
#9
|
|||
|
|||
|
|
|