![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Whats the most holes youve SUCCESSFULLY drilled into the back of a 3 foot tank??
Im digging this old 46 bowfront out of my garage, and setting it up for a friend.........
I want to know whats the most holes that have been successfully drill by anyone on a 46 bow, or any 3 foot tank for that matter. I dont care if im pushing the envelope, just curious. ![]() |
#2
|
|||
|
|||
eleventy billion, yes, billion
![]() Kinda depends on how thick the material is. If the tank was made with thicker material - 40 or so wouldn't bother me. James |
#3
|
|||
|
|||
i currently have 8 holes in a 65 tall
![]() |
#4
|
|||
|
|||
I have 4 in a 38
|
#5
|
|||
|
|||
Its fairly thin as anyone knows whos seen or had a 46 bow..........i want to give him 6.
James, i have put ALMOST eleventy billion in that last tank you made me........but its kind of a different ballgame with acrylic. ![]() Thanks for the replies......im going for the 6. |
#6
|
|||
|
|||
haha, i have the 46, i put 5 holes in... scared the S*** out of me, lol.
__________________
Paul AKA Johnny AIM: tptp279 No one dies a virgin, life screws us all. |
#7
|
|||
|
|||
I have 7 in a 50 gallon.
|
#8
|
|||
|
|||
Quote:
![]() Hey, Im curious........ive always drilled glass by laying the tank down on its side on a piece of foam on a concrete floor. That way i just put a rim of silicon and gravity holds whatever coolant i am using in. Did you just drill it upright?? as that obviously wont work on a bow. |
#9
|
|||
|
|||
You can still drill it laying down like you mentioned... just put it face down on some foam and then block it in with more foam like you would with a wheel that you didn't want to roll. Level it and you're good to go.
|
#10
|
|||
|
|||
i have 4 in the bottom and 2 on one of the small sides of my 40 breeder.
![]()
__________________
<>If you think reef tanks are tempermental, you should meet my Yorkie.<> |
#11
|
|||
|
|||
I have 6 holes in a 33G 36L12W18H. All on the back glass
![]() |
#12
|
|||
|
|||
![]() ![]() Here are the pics. |
#13
|
|||
|
|||
Here's the back of my 40 breeder during dry-fitting
![]() |
|
|