|
#301
|
|||
|
|||
just wondering during the rinse in FW and vinegar, the bubbles won't be as frothy as it would be in SW correct. Cuz basically it isn't chopping the bubbles as much as it should be right now. Is that normal?
__________________
Don't tell your problems to people: 80 percent don't care; and the other 20 percent are glad you have them...... Lou Holtz Click The Red House To see My Build Thread!!! |
#302
|
|||
|
|||
Was just wondering if there is anywhere you can buy replacement parts for these skimmers and pumps? Mainly the needlewheel for the otp pump on a dnw-200. I want to mod it with the mesh mod but want a spare in case I screw it up.
Thanks
__________________
120 AGA RR Ecosystem 3612 Reef Octopus DNW-200 GEO 6x18 Calcium Reactor GEO Kalk Reactor Aquactinics 2x250 12k Reeflux w/ 216 watts Blue+ T5's 210 lbs. Gulf-Keys-Fiji LR 50 lbs. LS |
#303
|
|||
|
|||
this what you are looking for?
http://www.customaquatic.com/customa...dexid=ps-ac-nw |
#304
|
|||
|
|||
Thank you Kurt03
__________________
120 AGA RR Ecosystem 3612 Reef Octopus DNW-200 GEO 6x18 Calcium Reactor GEO Kalk Reactor Aquactinics 2x250 12k Reeflux w/ 216 watts Blue+ T5's 210 lbs. Gulf-Keys-Fiji LR 50 lbs. LS |
#305
|
|||
|
|||
no problem, i happened to have it bookmarked
|
#306
|
|||
|
|||
Does anyone have an extra needlewheel for a otp3000. Custom aquatics are back ordered. No telling when I would recieve it. Just checking if anyone has an extra one the can part with.
Thanks
__________________
120 AGA RR Ecosystem 3612 Reef Octopus DNW-200 GEO 6x18 Calcium Reactor GEO Kalk Reactor Aquactinics 2x250 12k Reeflux w/ 216 watts Blue+ T5's 210 lbs. Gulf-Keys-Fiji LR 50 lbs. LS |
#307
|
|||
|
|||
Anyone used the giant skimmer with the 3 recirc ? If you have, what are your results and impressions?
__________________
300 gallon tank with too much things! |
#308
|
|||
|
|||
Quote:
My tank is quite lightly stocked and it pulls out the crud nicely: I'm going to be doing the meshwheel mod on it next week in all likelihood. Even without the mesh mod it blows away my old beckett in performance. I'm gravity feeding it from the overflow in my tank upstairs. The water level is ROCK SOLID on this; I have yet to adjust it and it keeps consistent. Only 68w per pump too, so much better than the 380w I was pumping into my beckett. |
#309
|
|||
|
|||
I thought the pumps were 38 watts each?
Could you tell me the size of the fitting where you feed the water into the skimmer? Thanks
__________________
300 gallon tank with too much things! |
#310
|
|||
|
|||
tgunn you should get HDTVguy to post his nog picks of when he had it on his tank that was down right gross.
|
#311
|
|||
|
|||
I have the NW 150 and when it is running properly it is great..I have been able to dial it in and really get some good dark gunk out of it. The problem is that twice now for no reason whatsoever (that I can find) the foam gets very inconsistant and overflows...In turn my remote collection cup overflows and starts flooding my carpet. I have watched this happen and from everything else in the tank nothing changes...Its like all the sudden the pump goes into turbo mode and starts creating a ton of bubbles.....
|
#312
|
|||
|
|||
96 that sounds like the issue with the washer in the venturi housing sliding over and then clear of the airline hole. I saw the same thing until I drilled and glued it.
jp
__________________
Rock in the tank is money not in my bank. |
#313
|
|||
|
|||
Quote:
The barbed fitting at the skimmer intake takes 3/4" inner diameter hose (1" outer diameter)... Tyler |
#314
|
|||
|
|||
Quote:
This is actually HDTV's 3 pump skimmer. He upgraded to the 4 pump model. I've seen some of his pics; he was pulling out some pretty heavy funk. However, he's got a huge bioload in comparison to me.. I've got 3 tangs, 2 chromis, 2 clowns and an anthias in my 140 with 100 sump. However, with such a huge skimmer I can pretty much feed whatever I want now. It's great! Tyler |
#315
|
|||
|
|||
man...68 watts is too much...
if it was 38 watts, i would've bought one. thanks for the info. Anyone have the recirc for up to 185 gal and can tell me the size of the pvc where you feed water into?
__________________
300 gallon tank with too much things! |
#316
|
|||
|
|||
Quote:
Compared to my old beckett skimmer I'm saving power, so I'm not complainign. Tyler |
#317
|
|||
|
|||
Think a the PCI 2000 would handle a heavy stock 300 gal tank?
I am thinking not, but thats the only one that would fit in the stand. I am currently using an ASM G4 with sedra 9k. It works well and all. The tank is kept clean.
__________________
300 gallon tank with too much things! |
#318
|
|||
|
|||
Is anybody using any of the HOB octopus models?
If so, post up some pics! I see that external HOB skimmer looks pretty cool. No pumps in the tank.
__________________
I caught you a delicious bass. |
#319
|
|||
|
|||
Does anyone know how to prevent the airline from sticking? Almost daily, I need to inject air into the airline feeding the pump because something sticks and clogs it up. I haven't had a chance to take the pump apart to see if there's something that needs cleaning (I guess I'm just lazy like that ). I figure someone must know a fix to this, so if I need to get some parts, like a new gasket or bigger airline, I'd like to get all the parts before taking the pump apart.
Thanks in advance
__________________
"Beer is proof that God loves us and wants us to be happy." ~ Benjamin Franklin |
#320
|
|||
|
|||
is it picking up really moist air close from the water surface or something?
Just got mine setup on my new tank, currently in the sand storm stage so check out what its pulling out |
#321
|
|||
|
|||
That is weird. Looks like vanilla cool whip.
|
#322
|
|||
|
|||
could someone give opinion as to which is a better skimmer.
PC ps 3000 or NW200 |
#323
|
|||
|
|||
Does anyone have any experience with the Octopus DDNW150 (8" with 2x2000 pumps)? I am leaning toward the DNW 200 right now and came across the 2 pump model. The prices for the 2 are similar.
They are both listed here: http://www.customaquatic.com/customa...ubcatID=ps-std |
#324
|
|||
|
|||
i purchased the Octopus Recirc Dual Pump Needlewheel 150 skimmer about a month ago and i am vary pleased great craftmanship and creates dense micro bubbles vary happy for the price it a steal compared to other prices that i was looking at when comparing skimmers
|
#325
|
|||
|
|||
Quote:
|
|
|