|
#1
|
|||
|
|||
SF Bay Area skimmer, lights, pumps
All items can be picked up in San Mateo. I also work in Hayward on Wednesdays and in SF on various days and you can pick up at either place if you'd like.
I'd be willing to ship some of the items if you will pay for shipping. Here goes: Aqua C EV-180, Eheim 1262, DIY auto waste collector, $150. -pending Ampmaster 3000 with the abrasive seal, $125. Sequence 1000 series 5000 GPH saltwater seals, $200. OM 4-way, version 2 drum, updated with the mag drive, you may need to get a few new fittings if you don't like how I plumbed it, $200. -pending I have 2 double ended 250 watt setups. They are all plug and play, RO III pendants: One is run by a PFO-pending One is run by a SLS-pending They all need to have the bulbs changed out as they have been in there about a year. I'd like to get $100 for each set up. I have a 4 bulb VHO setup run on an ice cap 660, with end caps, standoffs, I even have some 36 inch reflectors, 2 single and 1 double bulb. Needs new bulbs. I'd like to get $100. I have a 4 bulb T5 setup run on an ice cap 660, end caps, standoffs, reflectors. Needs new bulbs. I'd like to get $140. Ice Cap 3000 electronic ballast, will come with 2 sets of T-12 (VHO) waterproof endcaps. I'll throw in a Workhorse 5 ballast, I've never hooked it up, it has a dent in the case I don't know if it works but you can have it also, all for $25. Iwaki MX-70VT-15L, this is not your mother's Iwaki, got it from Customaqautic on this page: http://www.customaquatic.com/custom...ndexid=wp-aq-md $175 3 120mm case fans wired to a radio shack 1.5 amp dc converter, $30. Thanks, Ben |
#2
|
|||
|
|||
pm sent.
__________________
reefer in training. |
#3
|
|||
|
|||
PM sent
|
#4
|
|||
|
|||
I have 2 double ended 250 watt setups. They are all plug and play, RO III pendants:
One is run by a PFO-pending One is run by a SLS-pending They all need to have the bulbs changed out as they have been in there about a year. I'd like to get $100 for each set up. Very interested in this!!!! Please send me a PM on it if you still have it. It will have to be shipped to 50619. Thanks
__________________
Tanks gone, planning the next endeavor! |
#5
|
|||
|
|||
ygpm
|
#6
|
|||
|
|||
eheim 1262 a little much for the skimmer? how does it work?
|
#7
|
|||
|
|||
Skimmer
Pmed
|
#8
|
|||
|
|||
the eheim 1262 is a little much but i use a ball valve to throttle back the flow. i have found that as the pump ages i can open up the valve.
|
#9
|
|||
|
|||
Have you sold the skimmer? If not, I will take it.
|
#10
|
|||
|
|||
The skimmer has been sold.
Other things sold are: 250 watt MH setups T5 setup Ice Cap 300 fans pending: OM Ice Cap 150 setup Thanks all |
#11
|
|||
|
|||
Here's what' left:
Ampmaster 3000 with the abrasive seal, $125. Sequence 1000 series 5000 GPH saltwater seals, $200. I have a 4 bulb VHO setup run on an ice cap 660, with end caps, standoffs, I even have some 36 inch reflectors, 2 single and 1 double bulb. Needs new bulbs. I'd like to get $100. Iwaki MX-70VT-15L, this is not your mother's Iwaki, got it from Customaqautic on this page: http://www.customaquatic.com/custom...ndexid=wp-aq-md $175 |
#12
|
|||
|
|||
Damn. The T5 setup is gone, huh?
|
#13
|
|||
|
|||
Yeah, it's gone. On its way to New York
|
#14
|
|||
|
|||
do you still have the pump and the om?
__________________
My Friends Call me Aqua Pimp |
#15
|
|||
|
|||
OM is gone. Still have the pumps.
|
|
|