|
#1
|
|||
|
|||
wood tank
i know that there are plans out there for building a tank out of wood but instead of waterproofing the wood couldn't you line the whole tank with a pond liner and then use the black foam to seal the liner and then put the glass on. Any ideas
__________________
"life is like a box of chocaltes you never know what you are going to get" Same can be said about live rock |
#2
|
|||
|
|||
Yes many people have done this with no problems. Alot don't because of fear of tears. Urchins are to be avoided in all plywood tanks, they may eat a hole through the epoxy or tear the pond liner. Other than that just make sure you get it very flat before you fill with water.
|
#3
|
|||
|
|||
wonder if fiberglass would work better. the pond liner will work, just get it very flat, and glue it in place. i would double it, just in case.. luck and keep us posted
__________________
experience is a great thing, it lets you recognize a mistake when you make it again |
#4
|
|||
|
|||
Theres a guy on Saltwaterfish.com named Bang Guy that made a 900 gallon lagoon or something like that. He used the exact method your talking about.
__________________
Go East Red Devils Track 07'!!!!! |
|
|