|
#1
|
|||
|
|||
Controllers anyone?
Anyone using a controller such as the Neptune or ReefKeeper? Which do you guys prefer and why? Most likely, I will keep the wavemaking on the Tunze controller so that functionality is not so important to me.
|
#2
|
|||
|
|||
I use RK1 and run RK2s on Rogers system but have switched to the Profilux unit recently as it offers far more sensor capability and functionality and works with Tunze equipment, even has an electronic eye sensor like the osmolators, so one unit can do it all.
__________________
CVRC President |
#3
|
|||
|
|||
I think the profilux units are going to be great, from what I have read about them. I know neptune is also going to add a tunze controller to their systems in the future. Just do not know how far down the road that will be. Also I do not know how big of a price difference there is between a profilux and an aquacontroller Jr or RK2
Ron, how many tunzes will the profilux control? Also will it do as many different functions as the 7095? Carb, to answer you question between the RKs and Neptunes, IMO the neptune systems beat them hands down. They have greater adjustments and more functions. However, they are more difficult to program. |
#4
|
|||
|
|||
Phil where did you hear that neptune is adding a tunze controller to there systems? That would be awesome!
Neptune does currently offer the aquasurf which is a controller that is in competition with the Tunze 7095. That might be what you had heard about. I agree with phil about the reefkeeper vs aquacontroller. I would definitely go with the aquacontroller lineup over the reefkeeper. I have no experience with the proflux. I currently use an aquacontroller Jr and am happy with it.
__________________
Matt |
#5
|
|||
|
|||
The difficulty to program was a bit of a concern. I see that Neptune has some additional software that you can buy, or you can write code. I supposed you can also do some of it on the device directly. I have a minuscule amount of programming knowledge but it is not an everyday skill set of mine.
The Profilux may very well be a trump card, but it seems so very pricey. They start at $450. Does the basic model have the osmolators functionality, Tuzne multicontroller capability, PH probe, and temp probe? Because I can get an Osmolator for about $200 and a decent AquaController for $250. That doesn't count in the value of the Tunze multicontroller but that is not something I could utilize at this point. Also, the $450 cost of admission is steep. It is easier for me to buy 3 seperate $200 items than it is a single $450 item.. if that makes sense. |
#6
|
|||
|
|||
Quote:
|
#7
|
|||
|
|||
The programming on the aquacontroller is easy. I would not worry about that at all. If you have ANY programming experience it will be a breeze. It uses mainly simple if/then statements. Its similar to the basic programing language.
__________________
Matt |
#8
|
|||
|
|||
www.aquariumcontrollers.com
This guy has done some amazing research on controllers. There is an EXCEL spreadsheet that compares all the controllers he has heard of. Using the compare feature I think I like the ACIIIpro over the Profilux. But I don't think I would be disappointed with either.
__________________
"I SUPPORT K.R.A.C." [Originally posted by nrike "that has to be one of the ugliest tanks i seen in my life. but nice effort"] |
#9
|
|||
|
|||
Also remember most units are just the base unit and other features are add-ons $$$$
U'm running a Biotope and for the money is an awesome unit Doesn't need additional devices to make it work, can be programmed from th unit itself or laptop/desktop which is easier. Will also send a daily report or e-mail alerts if something is out of whack. Also does a whole lot more, has dimming a seasonal feature temp control pH contol ORP control CA control lights pumps Check it out http://www.rc-squared.com/
__________________
Romeo |
#10
|
|||
|
|||
__________________
"I SUPPORT K.R.A.C." [Originally posted by nrike "that has to be one of the ugliest tanks i seen in my life. but nice effort"] |
#11
|
|||
|
|||
If you need more information about it let me know or you can get in-touch with Ron on here.
I was torn between this and an AC3 pro but decided I wouldn't ever use the full potential of it either. Mine is the Deluxe version. Ask if I'd buy it again? YES it works great, the only thing I wish it had was a built in battery backup (however even if the power goes out it doesn't loose your settings, the clock just goes to whatever time) Easily fixed with an UPS though, needed it for the puter anyway Anyways it's worth it
__________________
Romeo |
#12
|
|||
|
|||
neptune aqua controllers are what i use I have a 2 and a 3 they are easy to do what ever you want with. I will probably get one from ronc
if I get another one.
__________________
Slave to the Reef !!!!!!!!! The Anthias are my Boss.. |
#13
|
|||
|
|||
It says on this site http://www.aquariumcontrollers.com/ that the aquacontrollers have the option to control tunze, does anyone know what this means>
|
#14
|
|||
|
|||
http://www.saltycritter.com/neptune/...er-control.htm
Scroll about 3/4 down this link for the AquaController. So this means the Tunze can now be controlled with the Neptune equipment? |
#15
|
|||
|
|||
Yes, that is what I was talking about earlier, did not know it was already on the market.
|
#16
|
|||
|
|||
http://archive.reefcentral.com/forum...readid=1035647
Here is a link talking about it, I'm on page 7 so far and still don't know how the book ends. |
|
|