|
#1
|
|||
|
|||
MJ Mods
Those with sure flow mods or whatever, how low can you guys place them below the water??? I have the sureflow one with dumas prop and can't go any higher than 6.25" below the water. I would love to put it a lot higher, but don't know how to without making major bubbles. Was thinking a square piece of acrylic right above maybe....
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#2
|
|||
|
|||
this got moved down fast.. up^^^
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#3
|
|||
|
|||
I have my sureflows at the very top although im using mj 400's and they're pointing slightly downwards. How are you getting bubbles?
|
#4
|
|||
|
|||
I have 2 on 600's and they are working great...
Did you turn the mod housing so the part with no slots are facing up? if you look at the cylinder you will see a spot that looks like they forgot to cut slots in, that should be facing up. if you still have issues email mark at http://www.algaefree.com/sure_flow.html he was great and responded fast |
#5
|
|||
|
|||
maybe u could shield the top portion of the slots.. Like if u look at tunze, theres no intakew on top
|
#6
|
|||
|
|||
yea i have the little part where no slots are towards the top, they suck air through the sides then and create a huge vortex
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#7
|
|||
|
|||
anyone using an mj1200 though??
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#8
|
|||
|
|||
Quote:
every hour...Before I bought the Mod I ran a wave master pro and 4 power heads.. |
#9
|
|||
|
|||
Quote:
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#10
|
|||
|
|||
Quote:
if all else fails email Mark...He's very helpful.. |
#11
|
|||
|
|||
I use 4 1200's on my 75 gallon reef! On a wavemaker of course, the flow gets pretty chaotic!
__________________
2001 black T/A WS6~M6 ASC#6979 331rwhp/348rwtq Mods: !CAGS, Pro 5.0, TSP lid, BGRA, Raptor shift light, Strange 4.10 gears, GMMG exhaust |
#12
|
|||
|
|||
Quote:
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#13
|
|||
|
|||
The problem with covering more of the slots is that you will
increase suction velocity at all other slots reduce the output of your mod to some degree I have a high flow mod on my maxijet 1200 (triton aquatics) and have to place mine about as low in the water as you have yours.
__________________
DRILL IT!!! |
|
|