![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#1
|
|||
|
|||
ASM G4+ w/Sicce Pump - Illinois (Naperville)
I am selling my ASM G4+ Skimmer. I have upgraded the pump to a Sicce PSK-2500 (same pump as ATI Bubble Master) with a mesh impeller which draws 18 lpm air and only uses 23 watts of power.
Here are the stock skimmer specs: ASM G4+ Rated: 400 Gal Footprint: 11.5"x16" Height: 24" Body: 8.5" Sorry for the bad pics, I can't get a good angle on it. It'll be thoroughly cleaned for you. $325 + shipping firm. ![]() ![]() ![]() Last edited by ppurcell; 12/18/2007 at 11:07 AM. |
#2
|
|||
|
|||
Obvously not stock. How did it work, the two working together?? Why are you selling it??
__________________
~Team Arctic Cat~ Let it snow, I have a hobby to pay for!!! |
#3
|
|||
|
|||
It works great, far better than with a Sedra. I also have an OTP-3000 pump which draws just about the same amount of air, but uses 75 watts of power and pushes a lot more water through the skimmer.
I think the Sicce pump is a far better pump and moves a lot less water through the skimmer providing much longer dwell time. As to the reason for selling it, I got a dual external recirc... |
#4
|
|||
|
|||
bump
|
#5
|
|||
|
|||
Do you have that pump (sicce) setup as a recirc mod?
|
#6
|
|||
|
|||
It is not setup as a recirc but it could be. I may have an extra 1" uniseal I could include in the sale.
|
#7
|
|||
|
|||
ttt
|
#8
|
|||
|
|||
pending
|
#9
|
|||
|
|||
Is it really only 24" tall? interested if so please let me know.
__________________
Kyle |
#10
|
|||
|
|||
It really is 24" tall, but as of right now I think I have a buyer for it. I'll let you know if it becomes available again.
|
#11
|
|||
|
|||
LMK if it's still available. Thanks
|
#12
|
|||
|
|||
skimmer is sold. thanks.
|
|
|