|
|
|
|
#1
12/11/2007, 03:13 PM
|
|||
|
|||
|
FS: 9 x 10mm blue 12v led
i am ditching my moon light DIY project... here are some larger sized 10mm leds. they are simple and have been fitted with resistors to work with a 12vDC power source already. i wanted to put on a moon light to show case each of my colonies but now with too many DIY projects i need to let go of a few and finish the ones i have... guaranteed to work, and will offer shipping... there is about 7 inches of wire connected to each led. and the leds are all separated and not connected to each other.
anyways, simple leds all for 8 bucks picked up. will take 12 shipped with paypal... thanks for looking... will also take a pack of soda? : ) |
|
#4
12/11/2007, 04:47 PM
|
|||
|
|||
|
i forgot to mention, if you are interested, i have 1 high power 3w WHITE led? and also a pulse driver for it... ( pulse = not constant power for better energy conservation) let me know why you need white leds...
|
|
#8
12/12/2007, 07:07 PM
|
|||
|
|||
|
Do you have a picture of the light and how long is it?
Thanks! |
|
#9
12/13/2007, 02:19 AM
|
|||
|
|||
|
charging battery on my camera...
oh, i found another high power led! hahahaha... so now i have: 2 white leds, 1 x 3w and 1 x 5.8w = need an led driver for the k2 led only... the other has the driver built into the heatsink... 9 blue regular bright leds resistor soldered in at base of led, so works right away with 12v source forgot to say the ruler is 5 inches 
Last edited by faded1004; 12/13/2007 at 02:39 AM. |
|
|
Linear Mode
