|
#1
|
|||
|
|||
Flexible PVC help!
Hi
I need some help straitening out 1 1/2" flexible pvc, it came from a roll of..... so it need some help to straight instead of curved.
__________________
Thanks Benny |
#2
|
|||
|
|||
Do you need it to be permanently straight? Or just straight to work with? You could either heat it up a little bit and work with it. Or you can just start rolling it in the opposite direction of the natural curve.
|
#3
|
|||
|
|||
I just finished doing this last week. You can heat it over the stove, rolling it back and forth so it doesn't burn.
Then hold it in the shape you want while you cool it under cold water from the sink. Brett
__________________
She ain't broke, but can we fix her more better? |
#4
|
|||
|
|||
I put mine under my mattress for a couple of days. Just put it where its forced to be straight.
__________________
Habitual Line Stepper. |
#5
|
|||
|
|||
Just curious (no offense intended)...if you need it straight...why use flex in the first place?
|
#6
|
|||
|
|||
I put a piece of hard wood in it and left it. It took a lot of the spring out of it. You could help it out by using a blow dryer over it or through it.. Not a heat gun.
__________________
If my phaser discharges off by as little as .06 terra watts, it would cause a cascading exothermal inversion. |
#7
|
|||
|
|||
Heat it up if you can and use a broom handle.
__________________
Craig & Holly 1-75g FW Planted 1-55g African Cichlid 1-125g w/ 4 turts 1-75g RR Reef 1-12g NC Mantis, 1-12g AP Brittle Star 2-cats 2-dogs (1 Catahoula Leopard Mix & 1 Shepherd Mix) |
#8
|
|||
|
|||
Run hot water in the tube and let soak. Take 1" PVC and put it inside the 1 1/2" Flex PVC, let sit overnight.
__________________
I'll try anything once...well, almost anything. |
#9
|
|||
|
|||
In the summer, stick a broom handle or piece of PVC in it and lay it in the sun.
|
|
|