|
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Questions for an owner of a Tunze Nano DOC 9002 skimmer
I'm trying to determine if the Nano DOC 9002 would fit in the rear filtration compartment of my 34 gallon Red Sea Max tank:
1) I need to know the width (diameter) of the skimmer cup? 2) What is the height of the skimmer cup - not including the tube underneath - just the height of the exposed part that would be sitting on top of the main unit after sliding it in place. 3) I can't tell from the online manual that I looked at - how does the unit actually attach to the hanging rack does it slide onto the rack or ? 4) Is the vertical position of the skimmer on the hanging rack adjustable up & down, to account for the actual water level? Thanks |
#2
|
|||
|
|||
Any updates to this? Apologies for bumping an old thread.
|
#3
|
|||
|
|||
try posting this on the "Tunze" forum under the Vendor Forum section of reefcentral.
The few times I had questions on tunze products, I usually got an answer within a few hours from a service rep. |
#4
|
|||
|
|||
The cup is 95 mm (3 3/4 inches) in diameter at the top and just about 100 mm (4 in) high above the body of the skimmer.
I can't tell you anything about the bracket mount as my 9002 came as part of the reefpack so I have the magnet mount.
__________________
128 litre/34 gal nano, click the homepage icon. |
|
|