|
#1
|
|||
|
|||
Koralia Mod for WaveMakers?
Well koralias aren't meant for wavemakers but I was wondering if anyone attempted to mod theres so that it would'nt make that clanking noise when it starts up? If you have one that you modded and it works really well please post a guide of how you accomplished it. TIA
|
#2
|
|||
|
|||
I have heard of people running these on the Seio wavemaker controllers. These controllers don't shut the pump off completely so the impeller continues to spin at about 50%.
|
#3
|
|||
|
|||
I heard of that way too, but I wonder what mods can be done to stop the noise if you were to use it on one ac jr or rk2. I did hear of someone using a rigid tubing to fix the problem.
|
#4
|
|||
|
|||
The clicking noise is from the impeller spinning backwards. The only way to not have it do that is to not shut off the impeller. The Seio controller ramps the power up and down (like Chull13 said, to about 50%), so you don't get that noise.
__________________
Craig & Holly 1-75g FW Planted 1-55g African Cichlid 1-125g w/ 4 turts 1-75g RR Reef 1-12g NC Mantis, 1-12g AP Brittle Star 2-cats 2-dogs (1 Catahoula Leopard Mix & 1 Shepherd Mix) |
#5
|
|||
|
|||
The Koralia's do NOT work with the Seio controller. I have tried this personally. They were not meant to run at 50%....the magnet is constantly rattling at that speed.
__________________
http://thebinaryreef.com The Red House = My Tank Thread Livestock: A. Ocellaris Mated Pair, Six Line Wrasse, Lemonpeel Angel, Fiji Golden Sailfin Blenny, Purple Firefish Mated Pair. |
#6
|
|||
|
|||
I have TWO of the Nano's in my tank on my AC Jr. with a random "Wave Schedule" and they have YET to make any noises. The AC Jr has a "Soft Start" feature which I don't know exactly what it does but they don't make ANY noise at all and they cycle on/off every few minutes in random between 3 & 7 minute intervals.
|
#7
|
|||
|
|||
I have heard that hydor is coming out with a wavemaker for the koralias by this summer. I am trying to be patient and wait. We will see what happens.
|
#8
|
|||
|
|||
Has anyone used them on a Red Sea Wavemaster ?
|
#9
|
|||
|
|||
Its probaly going to do the same. Anyone know of a mod for these pumps so that they can work on wave makers?
|
#10
|
|||
|
|||
I use them on my red sea wavemaker and they make the clicking noise. As of the moment I just tolerate it. I just bought an RK controller though and I am hoping it will improve this problem. I am going to be playing with mine to stop the noise when I get back to school.
|
#11
|
|||
|
|||
i had a #2 and a #1 on the red sea wavermaker and the num 1 was quiet but the num 2 was loud. the clanking you hear every once and a wile is the propeller spinning back words and forcing the magnet/prop ***. out and slide to the front of the pump. doing this it changes the magneticness some how so it will start to turn in the right direction. reason the #2 is louder is because the magnet/prop ***. is heaver. so more mass = more noise.
by the way i took off the num 2 but left the num 1 on the wave maker and had no problems or noise |
#12
|
|||
|
|||
I use 3 koralia 4's on a red sea wavemaker, yes they clank every so often when starting up but really do me it is no big deal considering the great benefit you get from having them on a wavemaker. I have yet to get my tank perfectly silent anyway so no big deal to me
|
#13
|
|||
|
|||
I run two #4s on the seio controller, and they work perfectly.
|
#14
|
|||
|
|||
Anyone have any ideas to solve that clanking noise when they start up?
|
#15
|
|||
|
|||
Quote:
__________________
Marine Aquarist Society of Barrie (MASB) Member, which is proudly supported by Aquariums Obsessed. |
#16
|
|||
|
|||
Got any pictures of that little mod? It sounds pretty good. I look forward to other mods aswell. Keep on posting TIA
|
#17
|
|||
|
|||
Maybe a prop stop like on the sure flows for the maxi mod..
the prop hits the stop and sins it the right way, but it still clicks as of now I just took my Wavemaster off it was no much of a PITA |
#18
|
|||
|
|||
So Koralia is not recommended for any controller? even with the carbon fiber shaft?
|
#19
|
|||
|
|||
I also run 2 K4s on the Seio controller with no problems.
|
|
|