|
#1
|
|||
|
|||
My Cube build
My Cube build
Ok i build the cube a few years ago for a Display tank for a indicator for BIG water tanks for construction.. it had a pump and a sump and the water filled and the incicator had a rod that came out of the top what was orange it was so the water truck did not over fill... any ways I have sence moded the tank and now it a fish tank i had to cut the top open and Add a over flow and cut the back hole in the tank biger So i used a Router and clamed a stright edge for it and made the top hole square adn thee added the over flow and then cut the over flow hole random_ryan and I used weld on 4 on it
__________________
Glendale and 75ave |
#2
|
|||
|
|||
next phase
1 There is 5 holes in the tank and there not in the right spots darnit!! Ok i can patch over them but that could look like sh!1 2 The holes are to close to the side to use a reamer drill 3 how do you put 1 1/4 hole acrylic in the same spot there is a hole and off set the hole so you can get a bulk head in ? hole saw need the center hole .. There is two ways clamp a 2x4 to the edge and drill but the edge of the top is big so this make that hard Or use a roto zip and go slow and go the right way if you go the rouge way it will make a bad cut and mess up the tank So i off set the holes as far as i could and put bulkheads in Next over flow pipe I cut the 90s down to make them tighter and use a Repair Coupling that side so i can a just the how high the pipe is Next I am going to use every hole i hope SO i make these side holes closed loop I go throw the over flow and Seal them Up
__________________
Glendale and 75ave |
#3
|
|||
|
|||
Ok the two top holes are going to be returns from sump the right hole i am going to put a 90 on and put a tube down with a sreen of some type i have found a long sreen yet for the intake of the Closed loop
the left side and going to be Closed loop return
__________________
Glendale and 75ave |
#4
|
|||
|
|||
Ok stand time
bad pic i need to take some pic on the stand i was testing the light the Tank was very dirty
__________________
Glendale and 75ave |
#5
|
|||
|
|||
If you need someone to build a stand for you, i can't do it.. hehehe
how ya doing man?? looks like you're tank will be up b4 mine!! |
#6
|
|||
|
|||
Nice, is that were the rock is going?
__________________
Max |
#7
|
|||
|
|||
the Rock is going in that one my 150 reef only has 65lbs in it and my 40 gal prop tank i just put up ..
I just bought 500lbs on dry life rock Too now i have to reactiveate it .... if any one has done this help!!
__________________
Glendale and 75ave |
#8
|
|||
|
|||
I got my hose to day and my tee's mounted my used pump and sump
I have the closed loop ....looped to it self for now i want to get water run in next few days MY Savko Plastics shipment should me in tomarow for my loc line and my unseals for the skimmer i going to be making OT hey Sg1.025 have you got your Bluk heads and hose yet?
__________________
Glendale and 75ave |
#9
|
|||
|
|||
hey any one like hate love? i tought i would get more replys lol
__________________
Glendale and 75ave |
|
|