|
#1
|
|||
|
|||
Anyone running a Maxi-Stream on a wavemaker?
I was thinking of running 4 MaxiStreams on a wavemaker and wanted to know if anyone has fixed the propeller glitches and is running one on a wave maker. If not what do you think would happen if I did run them on a wave maker ... I figure I will just have to change out a damaged propeller every 4 months or so.
__________________
120g Mixed Reef 20g Sump w/ Carbon and PhosFAR 5" DSB w/ 75# of Rock 2 150W 20k MH Gravity Fed H&S AF150-F2001 Eheim 1250 Return 2 Maxi-Streams on Swirler Steins Aqua Jr Tunze Osmolator |
#2
|
|||
|
|||
What propeller glitches did you have in mind? If you have a stopper built in, then the propeller should be able to correct the reverse spinning. The one thing that I have heard people complained about is that they don't like the chatter startup noise it makes when the wave makeer changes.
D. |
#3
|
|||
|
|||
I never finished reading the maxi mod threads but I remeber people saying that it couldnt be run on a wavemaker for some reason that had to do with the propeller stopper and the propeller wearing out realy fast.
Whats the cause of the chatter start up noise?
__________________
120g Mixed Reef 20g Sump w/ Carbon and PhosFAR 5" DSB w/ 75# of Rock 2 150W 20k MH Gravity Fed H&S AF150-F2001 Eheim 1250 Return 2 Maxi-Streams on Swirler Steins Aqua Jr Tunze Osmolator |
#4
|
|||
|
|||
It chatters because the propeller blade has to hit the stopper to correct itself. I suppose one could come up with a better stopper design that would be quieter but that would be trickier to do.
D. |
#5
|
|||
|
|||
My maxi-mod runs on a Chauvet dj timer, changes every 5 minutes, no problems after a couple of months.
__________________
Greg Visit our CTARS club website by clicking the 'red house' icon above :) |
#6
|
|||
|
|||
mine too, no problems I mean.
|
#7
|
|||
|
|||
I was looking at these to wavemakers
http://www.marinedepot.com/aquarium_...ve.asp?CartId= http://www.marinedepot.com/md_viewIt...Product=RS3611 which one should I go with? or not use either and go with another one?
__________________
120g Mixed Reef 20g Sump w/ Carbon and PhosFAR 5" DSB w/ 75# of Rock 2 150W 20k MH Gravity Fed H&S AF150-F2001 Eheim 1250 Return 2 Maxi-Streams on Swirler Steins Aqua Jr Tunze Osmolator |
#8
|
|||
|
|||
Why don't you save yourself a buck or 2 and get a Chauvet? IT works just as well if not better and is cheaper.
D. |
#9
|
|||
|
|||
I just did a google seardch for chauvet timer and the only timer I found was this
http://www.axemusic.com/product.asp?...4453&PT_ID=205 I68$ vs. 58$ Natrual Wave Maker 110$ Red Sea Wavemaster is there some cheaper model that I just cant find?
__________________
120g Mixed Reef 20g Sump w/ Carbon and PhosFAR 5" DSB w/ 75# of Rock 2 150W 20k MH Gravity Fed H&S AF150-F2001 Eheim 1250 Return 2 Maxi-Streams on Swirler Steins Aqua Jr Tunze Osmolator |
#10
|
|||
|
|||
|
#11
|
|||
|
|||
|
#12
|
|||
|
|||
Thanks for the help
saving 28$ is never a bad thing
__________________
120g Mixed Reef 20g Sump w/ Carbon and PhosFAR 5" DSB w/ 75# of Rock 2 150W 20k MH Gravity Fed H&S AF150-F2001 Eheim 1250 Return 2 Maxi-Streams on Swirler Steins Aqua Jr Tunze Osmolator |
#13
|
|||
|
|||
Personnally I think this would be a better option instead of a timer. SwirlerStien This creates a much better random flow than a pulse wave maker.
If you can mod a MJ then this little project would be a piece of cake. |
#14
|
|||
|
|||
Agreed ^
|
#15
|
|||
|
|||
I'm trying to hide my powerheads in my rock work and the swirlerstien is going to stick out like a sore thumb.
Ive already made up some DIY Deco Rocks for the MJ900's ... although the swirler stien would provide more flow then trying hide PH's in my rockwork I would rather sacrifice flow then have it sticking out in my tank. Its a all softie tank so flow isnt to important anyways.
__________________
120g Mixed Reef 20g Sump w/ Carbon and PhosFAR 5" DSB w/ 75# of Rock 2 150W 20k MH Gravity Fed H&S AF150-F2001 Eheim 1250 Return 2 Maxi-Streams on Swirler Steins Aqua Jr Tunze Osmolator |
#16
|
|||
|
|||
Obi-dad & Mr.Nudibranch:
hows the noise with the chauvet? no chattering? |
#17
|
|||
|
|||
There is sometimes a slight chatter on startup, only lasts for a fraction of a second and not very loud.
__________________
Greg Visit our CTARS club website by clicking the 'red house' icon above :) |
|
|