|
#1
|
|||
|
|||
Looking for relay for my controller
I'm looking for some 24 Volts relay, small, easy to wire for 5A 120V contact.
I'm using a PLC as controller with some 24VDC output so I need to convert them to 120Vac.
__________________
2 ocelaris 1-1.5", 1 bandaii cardinal, 1 yellow watchman goby 1 pep. shrimp, 10 nas, 1 astrea , 1 cerrith snails Some softys PH 8.1, Alk 11, NH3/4, NO2, NO3 0, Temp 77-79F, SG 1.025 |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
I doubt SSR would work with pump like Tunze 6025 as they use very low current (0.05A).
__________________
2 ocelaris 1-1.5", 1 bandaii cardinal, 1 yellow watchman goby 1 pep. shrimp, 10 nas, 1 astrea , 1 cerrith snails Some softys PH 8.1, Alk 11, NH3/4, NO2, NO3 0, Temp 77-79F, SG 1.025 |
#4
|
|||
|
|||
then where did the 5A come from?
nonetheless, I've been using one for six months to trigger a TDR - probably less load than that. I don't think that it would have any bearing really. |
#5
|
|||
|
|||
Well the 5A is for my lights, I need about 10 relay for lights, skimmer, filter, tunze pump.
The tunze pump use 6W and I know some pump don't work with the DC8 (controller with SCR). I'll look at my job, maybe my boss got a bin full of relay, but if I could get around 10 relay for cheap, easily connectable to wire that would be sweet.
__________________
2 ocelaris 1-1.5", 1 bandaii cardinal, 1 yellow watchman goby 1 pep. shrimp, 10 nas, 1 astrea , 1 cerrith snails Some softys PH 8.1, Alk 11, NH3/4, NO2, NO3 0, Temp 77-79F, SG 1.025 |
#6
|
|||
|
|||
Go to mcmaster.com, search for relays and you will get plenty of alternatives.
__________________
Did I write what I wrote? What the heck am I talking about! Well..... Nevermind. |
#7
|
|||
|
|||
This is what I'm using. Supposed to be good to 10 amps.
http://www.cctvonlinestore.com/produ...s_id=453057104 |
#8
|
|||
|
|||
I would look on ebay for DIN rail mount units... it will keep things much neater. Get a NEMA 4 or similar DIN box and put everything in it.
|
|
|