|
#1
|
|||
|
|||
Closed Loop Intake Question
The intake of my reeflo dart is 2" and seems kinda big to have coming from the inside of the tank. Should I run two 1" or 1 1/2" intakes seperated by a "T," or should I have it reduced to a single 1" or 1 1/2" pipe.
The outlet of the pump is 1 1/2" going to an OM 4-way. |
#2
|
|||
|
|||
Here is a picture of the way I did mine. 2 1.5 inch intakes into a tee that goes to 2 inch PVC
__________________
I found a way to make a small fortune running a reef tank. Start with a large fortune. Unofficial President of the SEACLONE haters club |
#3
|
|||
|
|||
you can narrow the dart to 1.5" inlet but no less so either way you will be fine. but running 2 1.5" into the 2" will be better.
__________________
Sam |
#4
|
|||
|
|||
Thanks for the replies and the pic!
|
|
|