|
|
|
|
#1
11/02/2007, 07:48 PM
|
|||
|
|||
|
3/4 bulkhead hole drilled
Is there anyone out there that could help me drill a hole or 2 for a 3/4" bulkhead. hole needs to be 1-7/16" to 1-1/2" hole. I don't know whether 1 or 2 yet because I haven't decided on a closed loop, or just using powerheads. I would really apprecaite it and even throw a frag your way.
If not. Does anyone know of a place that could do it? Preferrably this weekend. |
|
#2
11/02/2007, 08:11 PM
|
|||
|
|||
|
If you go with 1" bulkheads I can help you out. Don't have anything smaller.
__________________
Views expressed by this person are not neccessarily the views of any other person and may never be. Apology extended to any member who takes offense to any post. Offense is not meant nor intended. |
|
#3
11/02/2007, 08:18 PM
|
|||
|
|||
|
i might have to change it up...but its only a 30 gallon tank so I really don't need a 1" bulkhead. I'll let you know though. are you free this weekend at all?
|
|
#5
11/02/2007, 08:33 PM
|
|||
|
|||
|
I'll be here all day Sunday.
__________________
Views expressed by this person are not neccessarily the views of any other person and may never be. Apology extended to any member who takes offense to any post. Offense is not meant nor intended. |
|
#6
11/02/2007, 08:43 PM
|
|||
|
|||
|
glass
|
|
|
Linear Mode
