Quote:
Originally posted by RumLad
Is the front edge of the tank sitting over that 2x6?
I thought it was seated behind the front edge by a few inches, thereby spreading the load over the entire plywood topsheet and down through the sides, back and front. Either way, it should be sturdy enough.
|
The front of the tank sits directly above the 2x6 header, as see in this section cut:
__________________
90g reef/29g sump, DIY cabinet, 2x250w MH, 2x54w T5 actinics, ER RS135 skimmer, VorTech pump, 18w UV sterilizer
|
10/12/2007, 03:04 PM
Threaded Mode