|
|
|
|
#1
12/30/2007, 12:52 AM
|
|||
|
|||
|
BM 250 vs Deltec TS1060 decision
I have a 250g sps tank that I need to replace my skimmer on. I was told that I should go with a Deltec TS1060 rated for 270-400g, or to go with the BubbleMaster 200 rated for 250g. I know that Deltec has pretty accurate ratings but have no clue on the ATI skimmers. Which is better? Would I need to step up to the BM250 on my tank? Are there some other skimmers for the $700ish range I should consider?
|
|
#2
12/30/2007, 12:59 AM
|
|||
|
|||
|
I actually think that Deltec is very "generous" with their ratings. If you go ATI, I'd go with the BM250, not the BM200. Look at the numbers with the TS: 6" body, 24" tall, 900 LPH. That is not all that powerful a skimmer.
__________________
[This space for rent] |
|
#3
12/30/2007, 01:17 AM
|
|||
|
|||
|
Yeah...there is really no comparing those 2 skimmers
 they aren't anywhere enar the same size....ANY skimmer with a 6"x24" body will not skim a 250 gal tank...120 at the most.
__________________
Jeff |
|
#4
12/30/2007, 01:22 AM
|
|||
|
|||
|
But you think the BM250 will do a good job? I was also considering an orca systems skimmer, or a reeflo orca, but the reeflo is external, and I just don't have room in my stand for it. Any other skimmers I should be thinking off?
|
|
#5
12/30/2007, 01:26 AM
|
|||
|
|||
|
There are lots of good skimmers out there depending on your needs and budget. Deltec makes a nice skimmer, but I wouldn't use that one on your system. For internal, the BM250 is good (I have one), the new ATB conical skimmer looks good. H&S 200-1260 is another. What is the footprint and height you have to work with?
__________________
[This space for rent] |
|
#6
12/30/2007, 01:58 AM
|
|||
|
|||
|
Has to be 28" or less in heigth, and can't be bigger than 18x24, and it has to be an internal skimmer. I'd like to keep it under $1k.
|
|
#7
12/30/2007, 02:04 AM
|
|||
|
|||
|
not to be a band wagoner...but the Xtreme 250 will fit those dimensions, uses the same meshwheel Sicce's as the BM's, and is under $500. They have not started shipping yet, but if the verdict on them is good, i would look into them.
The ATB small will fit those criteria as well IIRC.
__________________
Jeff |
|
|
Linear Mode
