|
#1
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
A General Guide to Salt Mixes
Here is a list of what I measured for the big three in a number of the salt mixes we use today. This is intended as a guideline and I, in no way, guarantee these figures. All I can say is they were all tested under the same conditions, with a number of different brand test kits, using the same methods for each test. I believe these numbers are reasonably what you can expect from these salts mixed at 35 ppt or 1.0264
A special thanks to Bertoni for putting it in nice form.
Last edited by bertoni; 01/06/2008 at 01:40 AM. |
#2
|
|||
|
|||
Nice work.
__________________
Randy Holmes-Farley |
#3
|
|||
|
|||
very cool, interesting to see these results.
|
#4
|
|||
|
|||
Thanks Randy. I spent a lot of time insuring accuracy.
My only intention is to give the aquarist a general idea of what to expect from these different salt mixes. Very general. |
#5
|
|||
|
|||
I can confirm IO and RC figures even though they are manufactured in France over here.
Luck
__________________
Dan the Man |
#6
|
|||
|
|||
Thanks Dan, for reporting across the big lake.
|
#7
|
|||
|
|||
Thanks for all the work... was just contemplating switching salts.. it seems it's time to use something other than IO.
|
#8
|
|||
|
|||
Quote:
|
#9
|
|||
|
|||
Would there be any problems to be concerned about in using Oceanic if you do not have a "reef"....yet?
__________________
Carole Melting! |
#10
|
|||
|
|||
For a fish only? They are probably less sensitive to the mix not matching NSW.
__________________
Randy Holmes-Farley |
#11
|
|||
|
|||
Being a fish only, you probably don't want to be at 1.0264 anyway.
I keep my FO at 1.022 - 1.023 and at those levels the calcium and magnesium levels will be lower. The only thing you may want to keep an eye on is your alkalinity. A little baking soda will keep that in check. |
#12
|
|||
|
|||
Any info on Korallen-Zucht, Aqua-Craft, or Coralife Scientific Grade?
|
#13
|
|||
|
|||
The Coralife is the scientific grade. It's the only one they make that I am aware of. I haven't tested the other two yet.
I have a few more on my list. |
#14
|
|||
|
|||
Billybeau1: I have two questions:
1. Are there any negatives to changing salt mixes? 2. Does baking soda really bring down alkalinity? (this would be good to know in the future since I'm supplementing) Thanks!
__________________
Kasey |
#15
|
|||
|
|||
Kasey, I don't see any problem as long as its done slowly. Say 20 % water changes with the new salt and see how the tank reacts. And of course you'll want to monitor calcium and alkalinity initially to determine what changes the new salt mix made on your tank.
Baking soda raises alkalinity. It is what many of us use to supplement alkalinity loss between water changes. It may temporarily lower pH unless it is baked first. If baked, it will raise pH and caution should be used not to raise pH more that .2 per dose. I use good old Arm & Hammer. |
#16
|
|||
|
|||
I've used RC for the last few years with great results, but a few months ago I ordered three buckets and since using them I noticed my Mg was quite low... I tested the new water with a salifert kit and got a reading of 1100. A fellow reefer/LFS employee told me there had been a few complaints from other users about the Mg levels... anyone else notice this?
__________________
"This tastes like crap!" "Well here, try it with some selcon and garlic..." |
#17
|
|||
|
|||
There are two big threads in the chem forum discussing this. I hope we can keep these discussions there.
|
#18
|
|||
|
|||
I like those seachem reef salt numbers
|
#19
|
|||
|
|||
Yes, if they solved their past Borate issues (which I believe I read somewhere they did), this could be a good salt for medium to heavily stocked tanks. Reefers that have been using it awhile are reporting good results.
|
|
|