Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Lighting, Filtration & Other Equipment
FAQ Calendar Today's Posts Search

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05/22/2007, 09:32 PM
JohnL JohnL is offline
RC Staff
 
Join Date: Oct 1999
Location: Long Island, NY
Posts: 5,865
This thread was automatically split due to performance issues. You can find the rest of the thread here: http://archive.reefcentral.com/forum...35#post9995635
  #2  
Old 05/22/2007, 09:32 PM
alanmorehead alanmorehead is offline
Registered Member
 
Join Date: Oct 2006
Location: Lincoln, NE
Posts: 32
I just purchased a RS250 for my 180g tank and had a quick question on the recommended water level.

The manual is generic for all models and says that the optimal water level is 6"-8". This seems kind of weird because my RS80 is 22" tall and my RS250 is 30" tall, so I figured the bigger skimmer would proportionally have a higher water level. Does anyone w/ the RS250 have any real world recommendations for the water level? Should I use 6" on my RS80 and 8" on my RS250? or just shoot for 7" on both?
  #3  
Old 05/22/2007, 09:52 PM
shag26272 shag26272 is offline
Reefer
 
Join Date: Sep 2001
Location: New Orleans, LA
Posts: 2,462
I found on my RS-80 that it is easier to dial in if it is closer to the 8 inches
__________________
40 Breeder, 1 x 400 watt Radium 20k, Lumen max 2 reflector, Euro-Reef RS-80, Koralia powerheads, Randy's 2 part
  #4  
Old 05/22/2007, 09:56 PM
sjm817 sjm817 is offline
Generic Member
 
Join Date: Sep 2004
Location: Northern VA
Posts: 11,103
ER recommends for the RS250 to have the water level just covering the top of the pump elbow. Nice skimmer BTW.
__________________
[This space for rent]
  #5  
Old 05/22/2007, 10:02 PM
johns johns is offline
WRS Member
 
Join Date: Nov 2003
Location: Wisconsin
Posts: 2,424
When is the last time anyone here has gotten hold of ER customer service.

I have been emailing them for going on 3 weeks without a response.
__________________
"One day, someone showed me a glass of water that was half filled. And he said, "Is it half full or half empty?" So I drank the water. No more problem."
  #6  
Old 05/22/2007, 10:05 PM
sjm817 sjm817 is offline
Generic Member
 
Join Date: Sep 2004
Location: Northern VA
Posts: 11,103
I have always had better luck calling them.
__________________
[This space for rent]
  #7  
Old 05/22/2007, 10:05 PM
shag26272 shag26272 is offline
Reefer
 
Join Date: Sep 2001
Location: New Orleans, LA
Posts: 2,462
Ive had that problem with them before when I needed a new pump, some people say the customer service is awesome but they are one of the worst in my opinions.
__________________
40 Breeder, 1 x 400 watt Radium 20k, Lumen max 2 reflector, Euro-Reef RS-80, Koralia powerheads, Randy's 2 part
  #8  
Old 05/22/2007, 10:43 PM
EuroReef Tec1 EuroReef Tec1 is offline
RC Sponsor
 
Join Date: May 2007
Location: Laguna Hills, Ca
Posts: 119
Alanmorehead: PM sent buddy

Johns: PM sent!
__________________
The most beautiful thing that we can experience is the mysterious. It is the source of all true art and science. He whom this emotion is a stranger, who can no longer pause to wonder and stand rapt in awe, is as good as dead: his eyes are closed. -Albert Einstein
  #9  
Old 05/22/2007, 10:50 PM
sjm817 sjm817 is offline
Generic Member
 
Join Date: Sep 2004
Location: Northern VA
Posts: 11,103
Hey ER Tec1

[welcome]

Hope you will be a regular.
__________________
[This space for rent]
  #10  
Old 05/22/2007, 10:53 PM
shag26272 shag26272 is offline
Reefer
 
Join Date: Sep 2001
Location: New Orleans, LA
Posts: 2,462
hey , why did they remove the ER forum?
__________________
40 Breeder, 1 x 400 watt Radium 20k, Lumen max 2 reflector, Euro-Reef RS-80, Koralia powerheads, Randy's 2 part
  #11  
Old 05/22/2007, 11:04 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Quote:
Originally posted by alanmorehead
I just purchased a RS250 for my 180g tank and had a quick question on the recommended water level.

The manual is generic for all models and says that the optimal water level is 6"-8". This seems kind of weird because my RS80 is 22" tall and my RS250 is 30" tall, so I figured the bigger skimmer would proportionally have a higher water level. Does anyone w/ the RS250 have any real world recommendations for the water level? Should I use 6" on my RS80 and 8" on my RS250? or just shoot for 7" on both?
Hi,

I'm going to buy the same skimmer for my planned 180g as well.

I, too, am not getting any email responses from ER...

Can you do me a favor? Can you measure the height from the bottom of the skimmer to the bottom of the 90-degree elbow?

Also, are the pieces that make up that gate valve removable? Or are they glued in?

Thanks
  #12  
Old 05/23/2007, 12:23 AM
rickyscuba rickyscuba is offline
Premium Member
 
Join Date: Jun 2005
Location: Puerto Rico
Posts: 57
Question

Hi:

Recently I bough an Euroreef RS 100 and I'm in the middle of the registration process but I just cant find the serial number of the sedra 3500 pump. If someone can tell me were is it I will appreciate it.

Thank you,
__________________
Deep Down No one hear you scream!
  #13  
Old 05/23/2007, 12:24 AM
shag26272 shag26272 is offline
Reefer
 
Join Date: Sep 2001
Location: New Orleans, LA
Posts: 2,462
theres a label on it, you cant miss it
__________________
40 Breeder, 1 x 400 watt Radium 20k, Lumen max 2 reflector, Euro-Reef RS-80, Koralia powerheads, Randy's 2 part
  #14  
Old 05/23/2007, 12:56 AM
EuroReef Tec1 EuroReef Tec1 is offline
RC Sponsor
 
Join Date: May 2007
Location: Laguna Hills, Ca
Posts: 119
Shag is right.
There is a Euro-Reef, Inc label on it. Its silver. The serial number is on it.

Tbone: I will messure the skimmer when I get into my office tomorrow and post here.
__________________
The most beautiful thing that we can experience is the mysterious. It is the source of all true art and science. He whom this emotion is a stranger, who can no longer pause to wonder and stand rapt in awe, is as good as dead: his eyes are closed. -Albert Einstein

Last edited by EuroReef Tec1; 05/23/2007 at 01:10 AM.
  #15  
Old 05/23/2007, 01:17 AM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Quote:
Originally posted by EuroReef Tec1
Shag is right.
There is a Euro-Reef, Inc label on it. Its silver. The serial number is on it.

Tbone: I will messure the skimmer when I get into my office tomorrow and post here.
Thanks. I'm having a sump made, and I'm considering directing the skimmer's drain into the fuge. So I need to know how high (or low) to build the baffle. I also need to know if that gate valve is attached via slip fittings, and if they're glued in or not. I may need to mod it a bit to reach over to the fuge area.
  #16  
Old 05/23/2007, 09:49 AM
rickyscuba rickyscuba is offline
Premium Member
 
Join Date: Jun 2005
Location: Puerto Rico
Posts: 57
Unhappy

Hmmm? I think my pump comes without the label.
Now, what can I do?
__________________
Deep Down No one hear you scream!
  #17  
Old 05/23/2007, 09:54 AM
shag26272 shag26272 is offline
Reefer
 
Join Date: Sep 2001
Location: New Orleans, LA
Posts: 2,462
it should be on the side of the pump it basically takes up the whole side, maybe the can give you a new number or something
__________________
40 Breeder, 1 x 400 watt Radium 20k, Lumen max 2 reflector, Euro-Reef RS-80, Koralia powerheads, Randy's 2 part
  #18  
Old 05/23/2007, 10:46 AM
EuroReef Tec1 EuroReef Tec1 is offline
RC Sponsor
 
Join Date: May 2007
Location: Laguna Hills, Ca
Posts: 119
Ricky: PM sent

Tbone: From the bottom of the skimmer to the top of the 90 degree is about 11 1/4''. And you have 2'' in between the down pipe and the up pipe at the narrowest point (where the gate valve is). Also the pieces are slip fitted and glued.
__________________
The most beautiful thing that we can experience is the mysterious. It is the source of all true art and science. He whom this emotion is a stranger, who can no longer pause to wonder and stand rapt in awe, is as good as dead: his eyes are closed. -Albert Einstein
  #19  
Old 05/23/2007, 11:13 AM
Aquaticman74 Aquaticman74 is offline
Hawks Rule!
 
Join Date: Sep 2005
Location: Calumet City IL
Posts: 3,039
What's the word on the 10" skimmers? I know Jeff said May/June as a target release date. Anyone have any further info?
__________________
Mike

Sandbeds operate like wormholes and the excess nutrients and detritus are transported to a sister galaxy - Bomber

12-7-41 & 9-11-01 Never Forget!
  #20  
Old 05/23/2007, 11:26 AM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Quote:
Originally posted by EuroReef Tec1
Ricky: PM sent

Tbone: From the bottom of the skimmer to the top of the 90 degree is about 11 1/4''. And you have 2'' in between the down pipe and the up pipe at the narrowest point (where the gate valve is). Also the pieces are slip fitted and glued.
Thanks a lot! Looks like it will be a tough mod with those distances and the fact that the pieces are glued. My planned baffle height for the fuge is 17", and the distance between the skimmer section and fuge is 3"

If I were to mod the up-pipe by replacing it with a longer piece, and I added a short, horizontal piece before the 90-degree, would that affect the skimmer's performance?
  #21  
Old 05/23/2007, 11:53 AM
EuroReef Tec1 EuroReef Tec1 is offline
RC Sponsor
 
Join Date: May 2007
Location: Laguna Hills, Ca
Posts: 119
I have never tried this but I am pretty sure it would effect the performance in some way. I guess you could always try it and see. I wouldnt be too concerned with the horizontal piece but making the up pipe longer does. Just a side question: Why are you running the skimmer output directly into the fuge?

Quote:
Originally posted by tbone28
Thanks a lot! Looks like it will be a tough mod with those distances and the fact that the pieces are glued. My planned baffle height for the fuge is 17", and the distance between the skimmer section and fuge is 3"

If I were to mod the up-pipe by replacing it with a longer piece, and I added a short, horizontal piece before the 90-degree, would that affect the skimmer's performance?
  #22  
Old 05/23/2007, 12:47 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Quote:
Originally posted by EuroReef Tec1
I have never tried this but I am pretty sure it would effect the performance in some way. I guess you could always try it and see. I wouldnt be too concerned with the horizontal piece but making the up pipe longer does. Just a side question: Why are you running the skimmer output directly into the fuge?
Good question. My initial goal was to keep plumbing simple. I thought it would be easy to feed the fuge - low flow - via the skimmer's drain. Based on your feedback, however, it's probably less work to just T-off the tanks' drain or to T-off the return!

Side question: Why does it cost less to order skimmers via online vendors (e.g. SaltyCritter) than to order directly from your website?
  #23  
Old 05/23/2007, 12:56 PM
EuroReef Tec1 EuroReef Tec1 is offline
RC Sponsor
 
Join Date: May 2007
Location: Laguna Hills, Ca
Posts: 119
To keep it even more simple you can build an acrylic wall ad have a MJ900 or so pumping water through or over the wall for the fuge and have a hole/ grate right at water level for the water return exit for the fuge. This makes the water contact time in fuge greater and keeps the flow down. plus it only involves one hose and a small pump!
__________________
The most beautiful thing that we can experience is the mysterious. It is the source of all true art and science. He whom this emotion is a stranger, who can no longer pause to wonder and stand rapt in awe, is as good as dead: his eyes are closed. -Albert Einstein
  #24  
Old 05/23/2007, 01:12 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Quote:
Originally posted by EuroReef Tec1
To keep it even more simple you can build an acrylic wall ad have a MJ900 or so pumping water through or over the wall for the fuge and have a hole/ grate right at water level for the water return exit for the fuge. This makes the water contact time in fuge greater and keeps the flow down. plus it only involves one hose and a small pump!
Yes, that was my initial plan, until I came up with my "brilliant" idea to drain the skimmer into the fuge...not so brilliant as it turns out!

Did you see my question regarding why pricing is higher on your website? Do you guys do price matching?
  #25  
Old 05/23/2007, 01:37 PM
CarlosS CarlosS is offline
Registered Member
 
Join Date: Aug 2003
Location: Caracas, Venezuela
Posts: 125
Hi guys:

What happens if the elbow (discharge) is located to much high?
__________________
Regards,


Carlos Salas
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 09:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central™ Reef Central, LLC. Copyright ©1999-2009