Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Lighting, Filtration & Other Equipment
FAQ Calendar Today's Posts Search

 
 
Thread Tools Search this Thread Display Modes
  #626  
Old 12/02/2007, 02:54 PM
GatorWPB GatorWPB is offline
Registered Member
 
Join Date: Jul 2006
Location: West Palm Beach
Posts: 118
Quote:
Originally posted by Snowboarda42
Bump

I just got a RS-80P and mesh modded it the minute I took it out of the box. The bubbles are about the width of a sewing needle. I definitely love this skimmer so far, its really quiet and moves a LOT of air.

I'll post pics when I start getting skimmate.

I have a couple questions:

1. Whats your definition of "foam head"?

2. Where do I want the foam head at?

3. Do I need to adjust the air line at all? Its wide open right now. Does closing it make the skimmer skim more wet?
What did you use for the mod? Can you describe what you did?

I just bought a RS-100 and I am just starting to learn about the mesh mods that can be done. Right now, I am impressed with the skimmer, but any more I can do with it would be great.
I have my water line just at the bottom of the collection cup. The foam head is about 2" from the top of the chamber.
Here's a pic of the RS-100, right after cleaning so the foam head hasnt built back up yet.

  #627  
Old 12/02/2007, 03:49 PM
Tasher80 Tasher80 is offline
Registered Member
 
Join Date: Mar 2004
Location: Valparaiso, IN
Posts: 266
Having ER Issues

I have a CS8-3 skimmer. I have the gate valve on it. Before I bought it from someone the acylic where the elbow was was cracked so I fixed it with weldon 16 and supported it as you will see in the pictures. I figured I might as well explain it. Within the last month it seems like my skimmer goes nuts for no reason. I will be getting nasty stuff near the collection cup but its still in the neck not the collection cup. I turn the gate valve just a hair more and everything seems good. Come downstairs a while later and its overflowing. I check the airline for an blockages and the air is flowing fine. Any ideas?
__________________
72 G. All-Glass Bow Front Reef Ready tank, Maxi-Reef 100 Sump, 2 Maxi-Jet 1200 PH's, MAG 12 Return Pump, 48" Hamilton Fixture 2 x 250 DE MH's with 2 x 110 VHO Actincs.
  #628  
Old 12/02/2007, 04:06 PM
melev melev is offline
TRC Leader
 
Join Date: Sep 2002
Location: Ft Worth, Tx
Posts: 25,791
Perhaps the pump is surging, causing such changes? I would keep the foam bubbling right at the level of the collection cup's base. If you want to push some skimmate up into the cup, put your thumb over the airline tubing for a few seconds.
__________________
Marc Levenson - member of DFWMAS
  #629  
Old 12/02/2007, 07:58 PM
nattydread nattydread is offline
Registered Member
 
Join Date: Jun 2007
Location: st. louis
Posts: 260
I get my RS-180 tommorow!

Any advice in breaking it in faster? Ive been without a skimmer for about a week now.
__________________
If it it's not broken, don't fix it.
  #630  
Old 12/02/2007, 08:03 PM
sjm817 sjm817 is offline
Generic Member
 
Join Date: Sep 2004
Location: Northern VA
Posts: 11,103
Quote:
Originally posted by nattydread
I get my RS-180 tommorow!

Any advice in breaking it in faster? Ive been without a skimmer for about a week now.
Run it in a small tub in freshwater with some vinegar. Enough vinegar to get it foaming pretty good.
__________________
[This space for rent]
  #631  
Old 12/02/2007, 08:07 PM
nattydread nattydread is offline
Registered Member
 
Join Date: Jun 2007
Location: st. louis
Posts: 260
Thks.

Should i rinse it out afterwards?
__________________
If it it's not broken, don't fix it.
  #632  
Old 12/02/2007, 08:08 PM
sjm817 sjm817 is offline
Generic Member
 
Join Date: Sep 2004
Location: Northern VA
Posts: 11,103
You can if you want. Vinegar doesnt hurt anything.
__________________
[This space for rent]
  #633  
Old 12/03/2007, 12:49 PM
nattydread nattydread is offline
Registered Member
 
Join Date: Jun 2007
Location: st. louis
Posts: 260
What a monster!!!!!!!!!!!! Damn its purty.

The collection cup is bigger than my head. Glad I didnt get the 250.

"things are going to start happening now!"
__________________
If it it's not broken, don't fix it.
  #634  
Old 12/03/2007, 08:41 PM
nattydread nattydread is offline
Registered Member
 
Join Date: Jun 2007
Location: st. louis
Posts: 260
OK, so the beast is bubbling. Looks great, just a couple of observations.

1. to get rid of the larger bubbles, and to get a nice stem of smaller bubbles pushing up into the collection cup, I had to use the air intake valve. The drain pipe is shut about half way, and performance is noticably better with the air choked off a little.

This dramatically increased the amount of bubbles in the body, and quality in the stem of the collection cup, but it puts alot back into the sump. Not an issue as I have a great bubble trap.

Am I good to go? Looks good to me. It's been running for about 8 hrs now.

__________________
If it it's not broken, don't fix it.

Last edited by nattydread; 12/03/2007 at 09:04 PM.
  #635  
Old 12/03/2007, 09:05 PM
Tennsquire Tennsquire is offline
Registered Member
 
Join Date: Feb 2002
Location: Nashville, TN
Posts: 1,249
Remember that it's still breaking in. The bubbles will calm down after it gets a good slime coat on it (same deal for a while after cleaning the cup). I've noticed smaller bubbles by restricting the air intake as well, but I also think that the idea is to get as much air into the skimmer as possible.
__________________
Nothin' left to do but smile, smile, smile....
  #636  
Old 12/03/2007, 09:34 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
I'm in the same boat with my RS250. Everyone recommends removing the air intake, but my bubbles are much bigger that way. So, I leave the restrictor on, and close it *just a bit*. Result is nice, fine bubbles.

Tennsquire: Are you saying that I can leave the restrictor off, and at some point, my bubbles will be just as small?
  #637  
Old 12/03/2007, 09:41 PM
Tbduval Tbduval is offline
Registered Member
 
Join Date: Jun 2006
Location: Orlando, Fl
Posts: 149
I never have used the air intake valve on my RS250 and get great skimming. I would see what works best for your system. Should work great with or without the intake.
  #638  
Old 12/03/2007, 09:41 PM
Tbduval Tbduval is offline
Registered Member
 
Join Date: Jun 2006
Location: Orlando, Fl
Posts: 149
I never have used the air intake valve on my RS250 and get great skimming. I would see what works best for your system. Should work great with or without the intake.
  #639  
Old 12/03/2007, 09:54 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Can you post a pic of your RS250 and the bubbles? How far do you have your drain closed off?
  #640  
Old 12/03/2007, 10:32 PM
Tbduval Tbduval is offline
Registered Member
 
Join Date: Jun 2006
Location: Orlando, Fl
Posts: 149
I will post some pics. I don't have the new style drain. I guess I am old school. How do you like that drain setup?
  #641  
Old 12/03/2007, 10:37 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
I'm not a big fan of it. I don't like the fact that I can't submerge the drain under the water. If I do, it's super difficult to control the static water level within the sump. So I have to angle the drain above the water level and tie a filter bag around it to prevent splashing.

I had an older ER skimmer on my last tank. It had the old-style riser tube with sponge on it. I wouldn't say that's a good type of drain, but I liked it more than my current drain. It was also easier to fine tune the static water level.
  #642  
Old 12/04/2007, 11:26 AM
GatorWPB GatorWPB is offline
Registered Member
 
Join Date: Jul 2006
Location: West Palm Beach
Posts: 118
Im thinking I may have to add the air valve to my RS-100. Its almost been two weeks since I installed it and I feel like it can do better, based on everything Im reading. It is only on a 65g tank, but I feed alot and have a decent bio load.

Another question, does the gate valve kit increase the footprint at all?
My sump didnt have much space and the RS-100 fits in snug, but I cant have it any larger.

Thanks.
  #643  
Old 12/04/2007, 12:37 PM
Fishbulb2 Fishbulb2 is offline
Registered Member
 
Join Date: Mar 2006
Location: San Diego
Posts: 986
Has anyone tried drilling a small hole in the elbow after the twist pipe on the new style Euros. Wouldn't this relieve the back pressure that prevents you from having the exit pipe under water. I was thinking about doing this and then building a small air silencer for that hole.
__________________
hello
  #644  
Old 12/04/2007, 12:56 PM
nattydread nattydread is offline
Registered Member
 
Join Date: Jun 2007
Location: st. louis
Posts: 260
I dont see why it wouldnt work. But then again, whats a little back pressure when your allready choking the return liek I am.

MIne is at the water line.
__________________
If it it's not broken, don't fix it.
  #645  
Old 12/04/2007, 02:12 PM
Buddyboy Buddyboy is offline
Registered Member
 
Join Date: Oct 2005
Location: Vancouver, BC
Posts: 208
Hi All,

Looking to join the club soon but just have a few questions first!

Firstly, how much room (ie height) do I need to remove the RS-80 collection cup?

Secondly, this RS-80 would be running in about 9.5 inches of water. Is this too much?

I have only about 24" of height in my stand to work with...

Thanks in advance for your help!
  #646  
Old 12/04/2007, 03:19 PM
Snowboarda42 Snowboarda42 is offline
Huge Member
 
Join Date: Mar 2007
Location: Warshington
Posts: 838
Hey Buddyboy,

I just got the RS-80, its awesome. Definitely worth the $.

To answer your questions:

The collection cup needs ZERO (yes zero) more room to remove. Theres a locking ring that twists off and you don't have to move it up at all. You can check HERE and read under the "Got Skimmate" section.

I emailed Euro-Reef about the water level when I was thinking of getting mine, and they said 5-8" is ideal. I've actually heard it works better at 8". You can stack layers of egg crate underneath it to help lift it up. Mine is at 8" exactly with 3 layers of egg crate under it. My stand has 25" to work with, so I know the boat you're in.

Mesh-Mod that thing ASAP also.

Once you get it, check out this video:
CLICKY
__________________
40B Mixed Reef 100% Captive Grown Corals

See, that's the trouble with the world today. Not enough danger to kill off stupid people before they get old enough to breed. Bring back lawn darts! -PrivateJoker64
  #647  
Old 12/04/2007, 03:35 PM
Tennsquire Tennsquire is offline
Registered Member
 
Join Date: Feb 2002
Location: Nashville, TN
Posts: 1,249
Quote:
Originally posted by tbone28
I'm in the same boat with my RS250. Everyone recommends removing the air intake, but my bubbles are much bigger that way. So, I leave the restrictor on, and close it *just a bit*. Result is nice, fine bubbles.

Tennsquire: Are you saying that I can leave the restrictor off, and at some point, my bubbles will be just as small?
While I've noticed smaller bubbles with the air intake restrictor, I think the idea is to get as much air into the mix as possible. After I clean the skimmer cup, the bubbles are larger at first (with or without the valve). They get smaller after the skimmer slimes up a bit after a few hours of skimming.

I don't use the valve on either of my Euroreefs (RC135; CS6-1). Also, the 6-1 has an oversized Sedra on it (5000), so I don't know how this figures into the mix (it does skim MUCH better that way). I believe that ER recommends that the valve be run either wide open or completely off, and is to be used when you feed or use additives to keep it from overflowing if necessary.
__________________
Nothin' left to do but smile, smile, smile....
  #648  
Old 12/04/2007, 03:39 PM
Tennsquire Tennsquire is offline
Registered Member
 
Join Date: Feb 2002
Location: Nashville, TN
Posts: 1,249
Quote:
Originally posted by GatorWPB
Im thinking I may have to add the air valve to my RS-100. Its almost been two weeks since I installed it and I feel like it can do better, based on everything Im reading. It is only on a 65g tank, but I feed alot and have a decent bio load.

Another question, does the gate valve kit increase the footprint at all?
My sump didnt have much space and the RS-100 fits in snug, but I cant have it any larger.

Thanks.
You do need some extra room for the gate valve. I have had an older CS6-1 for years (same specs as the RS 100). I found that it works much better with the gate valve (old riser tube was a pain) and a bigger pump (Sedra 5000 vs 3500). I did put the air valve on it originally, and it helps to fine tune it. Now, I run it wide open. Try a bigger pump on it if you can get your hands on one; it's a very different skimmer with a bigger pump. You'll be amazed.
__________________
Nothin' left to do but smile, smile, smile....
  #649  
Old 12/04/2007, 03:49 PM
tbone28 tbone28 is offline
Registered Member
 
Join Date: Aug 2003
Location: Bay Area, CA
Posts: 709
Quote:
Originally posted by Tennsquire
While I've noticed smaller bubbles with the air intake restrictor, I think the idea is to get as much air into the mix as possible. After I clean the skimmer cup, the bubbles are larger at first (with or without the valve). They get smaller after the skimmer slimes up a bit after a few hours of skimming.

I don't use the valve on either of my Euroreefs (RC135; CS6-1). Also, the 6-1 has an oversized Sedra on it (5000), so I don't know how this figures into the mix (it does skim MUCH better that way). I believe that ER recommends that the valve be run either wide open or completely off, and is to be used when you feed or use additives to keep it from overflowing if necessary.
How would you compare bubble size with the valve completely off versus with the valve on, but run almost wide open?
  #650  
Old 12/04/2007, 04:09 PM
SDFISHMAN SDFISHMAN is offline
Registered Member
 
Join Date: Jul 2005
Location: San Diego
Posts: 79
Heres a picture of my Euro Reef CS 12-6. Next to it is a Euro Reef CS 6-2. The tank behind it is a 150G Eurobraced.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 06:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central™ Reef Central, LLC. Copyright ©1999-2009