|
#626
|
|||
|
|||
I want some steak and some Tyree LE frags.
|
#627
|
|||
|
|||
mavgi -
Without shafts, what do you do if the power goes out and you are not there to spin the impellers by hand when it comes back on? |
#628
|
|||
|
|||
Mavgi,
I dont understand what you said about make the mesh in the shape of a balloon. Do you mean the side of the mesh or the top of the mesh? Can you or someone else explain what you mean. |
#629
|
|||
|
|||
I think he meant just poofy and not very compacted together.
|
#630
|
|||
|
|||
Just measured the air on all three pumps and I'm getting 16 LPM, 17 LPM and 18 LPM. I'm not sure what the difference between them is but at 3080LPH total with excellent bubble/foam quality I'm pretty happy with it :-) It's obvious that the bubble diffuser chamber put a dent in the air pull but it's breaking in nicely and I'm sure it'll perform better than before with the new mods....
|
#631
|
|||
|
|||
Ken, are you talking about the ocean runner 2700s? i modded a 3700 last night out od curiosity and I was getting 45-50 scfh out of it on my 15-150 meter.
|
#632
|
|||
|
|||
Yeah those were 2700s. Man those are great numbers out of the 3700! Was it still quiet? by the way, I'm putting together a group to come over to your house and kick your butt for using frikin purple primer on your skimmers!!!!!!!!!! :-P
|
#633
|
|||
|
|||
Ha! Yeah it is really quiet! I didn't use purple primer, I used blue glue!
|
#634
|
|||
|
|||
is anyone getting dark skimate with the mesh? since doing the mod all im getting is lemonade
__________________
looking for grammar check ------------------------------------------------ |
#635
|
|||
|
|||
Quote:
YOu can probably get more. I'm pinning my 5-50 meter with an OTP3000, which is a slightly smaller pump. I'm curious to see what I can get my 2700 to pull.
__________________
72 Bow w/6x54w T5HO,,2xMaximod1200, PS-3000 skimmer |
#636
|
|||
|
|||
Quote:
I'm getting really dry skim. with a 3.5" neck, 50-60 scfh is just way too much, and I have to adjust really slowly.
__________________
72 Bow w/6x54w T5HO,,2xMaximod1200, PS-3000 skimmer |
#637
|
|||
|
|||
i did lower it quite a bit
__________________
looking for grammar check ------------------------------------------------ |
#638
|
|||
|
|||
You'd have to mod the crap out of the 2700 to get any more than 800 or so. The outlet of the pump is too small. I am thinking about chopping off all but the magnet 3/4 or so of the body of the pump and making a new shroud for it. I'll bet that with 1" ID in and 3/4" ID out you coule get a serious abount of air in there.
|
#639
|
|||
|
|||
Kent, I'd go up to 1" out. Thats what I'm running on my OTP3000 and I Think its a big part of the reason I'm moving such a HUGE amount of air.
Maybe I'll hack that pump up some more. We'll have to see.
__________________
72 Bow w/6x54w T5HO,,2xMaximod1200, PS-3000 skimmer |
#640
|
|||
|
|||
So 1" in and out? I'd like to make something in all black PVC and acrylic for asthetics and possibly replace my pumps with those insead. I'd bet that 80SCH would be possible out of a 3700 done up that way. Maybe 1.5" in and out, bigger meshwheel with like a 3-4" shroud....
|
#641
|
|||
|
|||
Ok - I modded my Sedra 3500 and went from 3M to P4 mesh. The results, ehhh so so. I'll give it a few days to break in but I can't honestly see much of a change in skimmate.
I was only able to fit 2 layers on and the pump had a bit of a time getting going so I think 3 is out of the question. |
#642
|
|||
|
|||
Mavgi thank you.
Ralph
__________________
RGibson |
#643
|
|||
|
|||
I got 6 lpm increase in air flow after mod the sd9000 with 3 layers of PF4 mesh. Not bad at all. Here are the pics.
before after |
#644
|
|||
|
|||
Nice!
I need one of those meters... but it seems like my skimmer is better than before, so no need at the moment. |
#645
|
|||
|
|||
Was that in a bucket or on the skimmer itself? How many feet of head if on the skimmer?
|
#646
|
|||
|
|||
I test both while in the bucket and on the skimmer. The reading are the same. The skimmer is ASM G4X so it is about 30" tall.
|
#647
|
|||
|
|||
Hey, guys
Has anyone tryed to pump air to a mesh wheel? My favorite skimmer is 7' tall (Actual head pressure of 60" )and i want to see if i can get 40- 60 scfh of small bubbles to it. Before i buy a $140 air pump just want to no if anyone has had any sucsess or failure?
__________________
Roland |
#648
|
|||
|
|||
Quote:
you need to reduce more the water level and you will get this : [IMG][/IMG] |
#649
|
|||
|
|||
Quote:
on the sicci pum it will not spin just with finger . Malifluous: look on the picture : [IMG][/IMG] [IMG][/IMG] |
#650
|
|||
|
|||
Meshy and good.
|
|
|