|
#1
|
|||
|
|||
Trouble with the DIY skimmer not working
I built a DIY skimmer from the Snailman DIY plans.It is 4" PVC 30" tall. I have a MY1200 pump and a Coralife Lump air pump w/ a 3" wood stone. the water gets to the top fine but the bubbles are not pulling out any gunk.Please advise
|
#2
|
|||
|
|||
often times there are oils or residue from the stickers on the acrylic. This can take up to week to break down. If you have good bubbles give it time.
__________________
Tossing conventional out |
|
|