|
Back to flow...After reading all the posts and much good info, I would like your expert opinion on refugium flow. I am planning a 180 (72x24x25) aquarium and I would like to have about 2000gph flow distributed by the Calfo design manifold. I plan on having (4) 1.5 inch holes drilled in the back and plumbed to a 65 gallon refugium. My goal is to house my skimmer, tumble some cheato and achieve my 2000gph flow rate through the single manifold without any power heads in the tank. My question is... can I run that much flow through the refugium and back through manifold without having too many bubbles or other major problems. Also on a side note, your book on Reef Invertebrates adds some great insight. Thanks for your advise.
Daryl Watson
|