Quote:
Originally posted by jmait769
Thanks Doug! I’m using a modified picture Jdieck posted. Is this correct or will I start a fire? 
Thanks for the help!!
Jay
|
Jay:
If you will be using a 12 V solenoid you can use a single adapter just need to insure that it has the capacity to actuate both the relay (which takes 130 to 150 ma) and the solenoid valve (which takes 500 to 600 ma) so if a single adapter is used I would recommend one with a capacity for 1000 ma (1 amp) at 12 VDC.