PDA

View Full Version : overflow question


Brucewrs
11/01/2006, 06:12 PM
I have an AGA210 with dual mega overflows. When I look behind the tank the water level on one is steady but the other keeps surging up and down a little..Is that normal?

Brucewrs
11/01/2006, 06:50 PM
I never really paid attention to the back so not sure how long it has been doing this.I just added a "t" fitting so water flows into both holes in my wet dry.I have a pro clear 400 and only had one hose hooked up because the other overflow is dumping into my fuge.I noticed that half of the bioballs were getting wet so I made a "t" so the water dumps into both holes.Less restriction too..??????




This is what I am talking about.The first pic the hose was down.I put it up some in the second pic but it is still surging.???I cant put it straight up because I clean the filter pad every other day.The top wont come off then.


http://i6.photobucket.com/albums/y213/udlose/102_0291.jpg
http://i6.photobucket.com/albums/y213/udlose/102_0290.jpg

Brucewrs
11/01/2006, 07:07 PM
This is what I had and only one side was getting wet.
http://i6.photobucket.com/albums/y213/udlose/100_0561.jpg

This is where my other overflow is going.Then it drains into the sump of the wetdry and 2 1560gph pumps,pump the water back into the tank.

http://i6.photobucket.com/albums/y213/udlose/102_0293.jpg
http://i6.photobucket.com/albums/y213/udlose/102_0290-1.jpg
http://i6.photobucket.com/albums/y213/udlose/102_0291-1.jpg