vanbeezy
09/25/2006, 08:32 PM
Now that all the livestock is gone, I have a bunch of equipment for sale. Local pick-up only, I'm located in Torrance.
Equipment for sale:
2 x 3/4" Sea Swirls…$120 each
1/4" Arctica JBJ Chiller (used only 3 months)…$500
MRC Single Chamber + additional Chamber Calcium Reactor w/ 10lb Aluminum CO2 tank and Milwaukee CO2 regulator and pH monitor…$500
Pan World 100PX external pump (fan cooled)…$125
Tunze Osmolator 3155…$135
Dolphin Ampmaster 2700 external pump (used w/ Sea Swirls)…$190
3 x ReefOptixIII pendant (takes double-ended bulbs) w/ 250W Icecap Ballast…$180 each
2 x "Do it yourself" Kalk/Neilson Reactors made from MRC acrylic tubes (no leaks)…$65 each
Tank/Stand/Canopy/Sump/Skimmer (Description Below)…$900
Tank: 150 gallon 5x2x2 eurobraced glass tank w/ dual corner drilled overflows w/ durso standpipes. Tank has black molding, has a black back, and black overflows. The eurobraces are predrilled to accept return plumbing (at the back) and seaswirls (at the front). Overflow walls have also been pre-drilled for a closed-loop for 1.5" plumbing. No scratches on the tank.
Stand: Stand is made out of 2x4's and 6 4x4's reinforced w/ Simpson ties, glue and screws. 3/4" plywood sheets make up the top and bottom surfaces. The base of the stand is lined w/ linoleum for a little waterproofing and entire stand coated w/ marine spar varnish. On the outside of the stand is oak plywood paneling which is designed to be completely removed to expose all 3 sides of the tank for easy access. The panels have a black mat finish on the outside and glossy white on the inside. The stand was big enough to house a closed loop pump (not included), a return pump (not included), dual chamber calcium reactor w/ 10lb. CO2 tank (not included) and sump/refugium. Total height of the stand is about 34".
Canopy: Canopy is made of oak plywood w/ black paint (outside) and glossy white (inside). The entire canopy is designed w/ a small flip up door for feedings and minor maintenance. The entire top of the canopy also flips up and back (via a piano hinge) for major maintenance. Canopy houses 2 x 4" IceCap variable speed fans w/ temp sensors (included. One fan is old, one is 2 weeks old). The canopy can hold 2 VHO's (bulbs, end caps, and ballast included) and can also hold 2 MH spiderlight reflectors (which it used to hold) or 2 HQI pendants (which it currently holds). Pendants/ballasts not included . Once mounted on the tank the total height comes to about 6'.
Sump: Acrylic sump was custom made to fit perfectly under the tank. The sump has 3 chambers. 1 chamber is the skimmer chamber. It currently holds a Southbay CS8-1 (Euroreef knockoff) w/out needlewheel impeller (skimmer included). The other chamber is a refugium for macroalgae which holds an LOA 65W pendant over it (included). Both of the chambers output to a collection chamber where the heater is located along w/ carbon, etc. At the end of the collection chamber is the return pump via a 1" bulkhead. (return pump and bulkhead not included). I BELIEVE THE SUMP HAS A SLOW LEAK AROUND THE BOTTOM EDGE…DEFINITELY EASILY FIXABLE…SOLD AS IS.
Equipment for sale:
2 x 3/4" Sea Swirls…$120 each
1/4" Arctica JBJ Chiller (used only 3 months)…$500
MRC Single Chamber + additional Chamber Calcium Reactor w/ 10lb Aluminum CO2 tank and Milwaukee CO2 regulator and pH monitor…$500
Pan World 100PX external pump (fan cooled)…$125
Tunze Osmolator 3155…$135
Dolphin Ampmaster 2700 external pump (used w/ Sea Swirls)…$190
3 x ReefOptixIII pendant (takes double-ended bulbs) w/ 250W Icecap Ballast…$180 each
2 x "Do it yourself" Kalk/Neilson Reactors made from MRC acrylic tubes (no leaks)…$65 each
Tank/Stand/Canopy/Sump/Skimmer (Description Below)…$900
Tank: 150 gallon 5x2x2 eurobraced glass tank w/ dual corner drilled overflows w/ durso standpipes. Tank has black molding, has a black back, and black overflows. The eurobraces are predrilled to accept return plumbing (at the back) and seaswirls (at the front). Overflow walls have also been pre-drilled for a closed-loop for 1.5" plumbing. No scratches on the tank.
Stand: Stand is made out of 2x4's and 6 4x4's reinforced w/ Simpson ties, glue and screws. 3/4" plywood sheets make up the top and bottom surfaces. The base of the stand is lined w/ linoleum for a little waterproofing and entire stand coated w/ marine spar varnish. On the outside of the stand is oak plywood paneling which is designed to be completely removed to expose all 3 sides of the tank for easy access. The panels have a black mat finish on the outside and glossy white on the inside. The stand was big enough to house a closed loop pump (not included), a return pump (not included), dual chamber calcium reactor w/ 10lb. CO2 tank (not included) and sump/refugium. Total height of the stand is about 34".
Canopy: Canopy is made of oak plywood w/ black paint (outside) and glossy white (inside). The entire canopy is designed w/ a small flip up door for feedings and minor maintenance. The entire top of the canopy also flips up and back (via a piano hinge) for major maintenance. Canopy houses 2 x 4" IceCap variable speed fans w/ temp sensors (included. One fan is old, one is 2 weeks old). The canopy can hold 2 VHO's (bulbs, end caps, and ballast included) and can also hold 2 MH spiderlight reflectors (which it used to hold) or 2 HQI pendants (which it currently holds). Pendants/ballasts not included . Once mounted on the tank the total height comes to about 6'.
Sump: Acrylic sump was custom made to fit perfectly under the tank. The sump has 3 chambers. 1 chamber is the skimmer chamber. It currently holds a Southbay CS8-1 (Euroreef knockoff) w/out needlewheel impeller (skimmer included). The other chamber is a refugium for macroalgae which holds an LOA 65W pendant over it (included). Both of the chambers output to a collection chamber where the heater is located along w/ carbon, etc. At the end of the collection chamber is the return pump via a 1" bulkhead. (return pump and bulkhead not included). I BELIEVE THE SUMP HAS A SLOW LEAK AROUND THE BOTTOM EDGE…DEFINITELY EASILY FIXABLE…SOLD AS IS.