PDA

View Full Version : ~160g Custom Tank and sump; Sacramento/Rocklin CA


user48953
09/22/2006, 02:50 PM
Hey folks.. We have a new baby coming soon and i'm forced to downsize and/or put reefing on hold for a bit.. i'd rather sell off my big tank and perhaps setup a smaller system.. here's the first post of my equipment..

The ~160g tank was custom built by James Steele from Envision Acrylics (http://www.envisionacrylics.com/). It is made from 3/4" thick Spartech cell cast acrylic (true standard sizing; not metric sizing) with 3 clear side walls, 1 black wall (small end), and black bottom. The black overflow is built in with 2 openings for one 1" SCH80 (return) and one 1.5" SCH80 (drain) bulkheads. The top is 2.5" eurobraced, but with a 6" (off)-centered brace to fit 2 Lumenarc's. The center brace was b/c i don't 100% trust eurobracing, and it can be cut out if you like.

Tank and Sump w/LS: $600 (stand is free)

PM, post reply, or email me at spshuy@yahoo.com

thanks for looking
huy


The system was broken down during my recent move and these pics are from when i initially set it up.

Tank dimensions: 62" L x 24" H x 24.5" W
http://reefcentral.com/gallery/data/500/47538mini-IMG_0902.JPG


http://reefcentral.com/gallery/data/500/47538mini-IMG_0941.JPG

55g acrylic sump w/150 lb LS
http://reefcentral.com/gallery/data/500/47538mini-IMG_0945.JPG

ncsaltwater
09/22/2006, 03:25 PM
Very Interested where you located

ncsaltwater
09/22/2006, 03:28 PM
Crap CA :( I'm in NC to far