24DX Nano Cube question..

[juke]

Any nanocubers out there that have successfully added an overflow and sump! I am half way through the cycle and am contemplating how I would like to run this system.

I will be running mostly SPS. I have a DIY hood with a 250w SE. I will be running a bakpak skimmer a Seio 620 pump for flow.

Any advice on a way to add a sump/refugium via a HOB overflow would be welcome

Josh

[trekbear]

There are a few success stories with this. Check out 10"reddevil on nano-reef.com . I think his was a 6 gal but he did it for a contest they had going. Also search on the site for others. I can't recall them ATM...

*edit* oops :blush: I didn't pay real close attention. His tank is drilled. He did it himself though. The tanks can be drilled for internal overflow from the sump. If it were me that is the way I would do it. I had an external overflow (granted YEARS ago ;) ) but we had a power outtage and a nice flooded floor to come home to. with an internal oveflow you won't have that problem.



HTH,
TB