Loc Line

[jaccoo]

the search link isnt working so i am forced to ask here, please forward the appropriate link if this topic has previously been discussed...

Has anyone used the loc line fittings? are they easy to use

i want to set up my EHEIM 1262 (900GDH) to my SCWD using the loc line fittings.

A. is the tubing water tight, do i need to do anything special to it to ensure air tightness? ie. teflon tape
B.B. Do i need to buy the wrenches. i say wrenches, because i want to run a 3/4 line from each output on the SCWD that T's off into two 1/2" arms on each side of my 40 gallon breeder. so i would have a total of 4 points of waterflow entering the tank to prevent deadspots.
C. is the 1/2 line capable of handling the output from the EHEIM 900dgh, without springing leaks from over pressure.

Thank you for the replies...

[Entropy]

A, Nothing special required. They are air tight under normal pump pressure.

B, No wrenchs required but it does make it easier. I would go with 3/4 inch regardless so you don't add any restriction.

C, see B. :)

[Willie_6]

I just picked up some myself. Very slick design. Very easy to use. It is rather expensive. Much more than PVC. Definitely good stuff.