Heaters?

[LUCKY42032]

What is the best and most reliable heater that I can buy? I like the idea of having a fully submersable tube and a out of tank controlls. What are some opinions of the titanium heaters?

[Entropy]

The most reliable IMO is a titanium heater (a simple Won Pro heat for instance) on a good single or dual stage temp controller. Set the heater about a degree higher than you want the tank and then set the controller at the actual temp you want and you are done. :)

I use a ReefKeeper controller (www.digitalaquatics.com) and a 250w Won Pro Heat II, 2 150w Ebo Jagers, and a 150w Visotherm on my setup.

[Avian]

Originally posted by Entropy
The most reliable IMO is a titanium heater (a simple Won Pro heat for instance) on a good single or dual stage temp controller. Set the heater about a degree higher than you want the tank and then set the controller at the actual temp you want and you are done. :)

I use a ReefKeeper controller (www.digitalaquatics.com) and a 250w Won Pro Heat II, 2 150w Ebo Jagers, and a 150w Visotherm on my setup.

I agree.

[LUCKY42032]

thanks

[jsteidl]

Entropy is correct here. I run something very similiar and have never had any problems

[prodman]

Is there a temp only controller that would be a little cheaper?