Correct in-line pump for 60gallon CL?

[arpee79]

Well I just orderd a little giant 4-mcqx-scMagnetic Drive
Salt or Fresh Water
Motor: 1/10hp
Voltage: 115V
Amperage: 1.3A
Wattage: 145W
Flow Rates: 1325gph @ 1ft head; 1225gph @ 3ft head; 1080gph @ 6ft head; 800gph @ 10ft head
Inlet/Outlet: 1in FNPT / 1in MNPT
Max Head: 17ft
Max PSI: 7.4
Shut-Off Head: 14ft
Dimensions (L x W x H): 11in x 5.5in x 5.3in
Cord Length: 6ft Pump Im getting for my 60gallon setup.I want this pump to pretty much run as much as I can hook up to it like my chiller ,refugium,uv light ..or should I just make it a Closed loops set up and is this way to much GHP flow for either setup ?. Thanks

[arpee79]

*Scratching my head* Anyone?

[h20cooled]

That should be a good pump, it will have good pressure which is what you want on a closed loop. It might be a little low on the flow amount if you have it at 6'.

Rich