PDA

View Full Version : kent aquadoser mod.


kevensquint
02/23/2005, 06:32 PM
Have any of you guys modified the aquadoser so it gives a nice slow drip from full to empty?When I adjust the drip to about 1 per second it'll do it for about half the container then stop by itself.I think the hose being smaller than normal airhose might be the problem,but the fitting coming out of the container is too small to fit normal air line tubing.

Bamm Bamm
02/24/2005, 01:51 PM
It stops because it clogs up with kalk.. Which size container are you using?

kevensquint
02/24/2005, 06:03 PM
It's about a half gallon maybe less,I think you may be right,you'd think kent could have forseen this problem selling it with such a tiny hose.If I can figure a way to get a normal sized air hose on there without leaks I'll do it.

Toddrtrex
02/24/2005, 06:09 PM
One other thing to think of, which I've noticed since I've added my new sump, is the level of the kalk water in the doser in relation to the end of the line. In my case the end of the line is just below the plain of the exit hole in the doser, therefore as the level in the doser drops so does the rate of drips. HTH