tgreene
07/15/2004, 12:00 PM
I bought this a few months ago for a custom project for an LFS in the area, but then the jerk/owner changed his mind and refused to pay me, after I had already spent several hundred dollars and numerous hours on this project... :mad2:
This is a Hayward 1/2" PVC Solenoid Valves with EPDM Seal, that I have already installed a 3-wire electrical pigtail on. I purchased this from US plastics for $223.69, but will accept a reasonable offer.
The unit is nearly identical to the one pictured in the following link, and the reference part number is #19086.
http://www.usplastic.com/catalog/product.asp?catalog%5Fname=usplastic&category%5Fname=Solenoid+and+Actuator+Valves&product%5Fid=PVC+and+CPVC+Solenoid+Valves
Also, for the sake of clarity, the head of this unit rotates so that it can be mounted in nearly any position.
* In order to mount this in the housing that I was using, I had to ground off a small portion of the base of the mounting platform, but it doesn't hurt a thing!
Paypal accepted.
This is a Hayward 1/2" PVC Solenoid Valves with EPDM Seal, that I have already installed a 3-wire electrical pigtail on. I purchased this from US plastics for $223.69, but will accept a reasonable offer.
The unit is nearly identical to the one pictured in the following link, and the reference part number is #19086.
http://www.usplastic.com/catalog/product.asp?catalog%5Fname=usplastic&category%5Fname=Solenoid+and+Actuator+Valves&product%5Fid=PVC+and+CPVC+Solenoid+Valves
Also, for the sake of clarity, the head of this unit rotates so that it can be mounted in nearly any position.
* In order to mount this in the housing that I was using, I had to ground off a small portion of the base of the mounting platform, but it doesn't hurt a thing!
Paypal accepted.