PDA

View Full Version : high alk


MSHUR
06/26/2004, 05:10 PM
hi,randy
i start dosing turbo ca,like u recomend and alk went up to 14.2
ca also went up.but i am concern about alk..
what should i do?
mike

Randy Holmes-Farley
06/26/2004, 05:55 PM
Went to 14.2 dKH from what level? Turbo calcium shouldn't raise alkalinity.

This article may help:

Solving Calcium and Alkalinity Problems
http://www.advancedaquarist.com/issues/nov2002/chem.htm

MSHUR
06/26/2004, 05:57 PM
hi,
it went up from 10.5/11
i did read this article many times:)))
should i cut dount on co2 or add more ca cloride?

thankx

Randy Holmes-Farley
06/26/2004, 08:46 PM
I can't think why the alkalinity would have risen from the turbo calcium.

What is the calcium now?

Maybe the CaCO3/CO2 reactor is just driving too much into the system, and backing off on the CO2 bubble rate is in order.

MSHUR
06/26/2004, 10:22 PM
calcium is 370-380 right now
i will cut down co2 bubbles and will let stay like it for 2-3 days

thankx,Randy

Randy Holmes-Farley
06/27/2004, 06:58 AM
That sounds good. Also, with the calcium below 400 ppm, keep adding the turbo calcium when you drop back on the CO2.