View Full Version : Drilled or built-in overflow?
kentonhq
02/13/2004, 11:55 AM
1) What would you have (drilled or built-in overflow) for a 120gal (48x24x24) glass tank?
2) Pros and cons of each type?
3) If it's built-in overflow, how many overflow at what size is adequate for a 120gal glass with the size above?
Please help.
Kenton
dragon_slayer
02/13/2004, 08:09 PM
either way you end up with holes and overflows, so i'd go with the prebuilt, its faster and less hassel.
kc
I had a 55gal with 2 - 1"1/2 bulkheads at the top of each corner for my overflow, I'll never have that again to loud. Now I have a 100gal with one 2" built in overflow with a stadpipe very quiet.
Shane
beaver
02/14/2004, 12:56 PM
drilled the only way to go i have a 73 show oceanic with 3 2" holes one in the left corner (return) and two in the right corner for the drains all fed by pvc no over flow to take up room and look like @@@@ hope this helps only thing, i make sure of is that the calrup doesnt get hung in it (food for tangs ) about once a week
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.