Square pin and workhorse five....help please.....

[john76]

Any help would truly be appreciated....

The endcaps from my CSL light that I gutted have four wires coming out of them.

A red, black, green and white.

What do these attach to? I have the standard workhorse 5 ballast with the 4 reds and 1 yellow coming out of it.

Thanks, for any help......

Here's a pic of the wire coming out of the waterproof endcap.
http://images.snapfish.com/337%3A775523232%7Ffp47%3Dot%3E2328%3D338%3D825%3Dxroqdf%3E23233%3B47%3B6979ot1lsi

[john76]

ttt

[john76]

ttt

[Reefer33]

Think of it like this, all a power compact is a flourescent bulb bent over in half. You need to put the two seperate red wires to two different colored wires which will be on one side of the square configuration. Then take the one yellow wire coming off and tie it into the 2 leftover wires which will make up the other side of the square configuration. Also there are wiring diagrams on fulham's website that might be helpful. Hope that helps some.

[john76]

Thanks Reefer,

I finally understodd what you were trying to say. And Voila.....

http://images.snapfish.com/337%3A944723232%7Ffp8%3Enu%3D3237%3E247%3E734%3Ewsnrcg%3D32324%3A674846%3Cnu0mrj

[Reefer33]

Cool man, looks good! Glad to help out whenever I can.