PDA

View Full Version : Can I add DI to an existing RO filter?


antfarm2000
01/10/2003, 03:56 PM
I found a good price on a really nice RO filter, except it's only RO...not RO/DI.

Is there anyone that sells De-Ionization filters seperately? Is there some way to hook up a DI onto the end of the RO?

Siddroww
01/10/2003, 04:02 PM
Yes you can , but you want it after your RO to help save the DI cartridge . I know that Marine Depot sells them , Its in a book I have at home but I cant seem to find it in their website .

Siddroww
01/10/2003, 04:05 PM
Here it is , the 11th item down , $64 .



http://www.marinedepot.com/a_ro_sp_ac.asp?CartId=

antfarm2000
01/10/2003, 04:24 PM
How Necessary is the De-Ionization if you have an RO system?

griss
01/10/2003, 04:29 PM
Originally posted by antfarm2000
How Necessary is the De-Ionization if you have an RO system?
It really depends on what is in your water. If your water has silicates or phosphates a DI unit will help to reduce these. Personally, I run 2 DI cartridges after my RO.
Griss

DRT
01/11/2003, 07:05 AM
you can also hook a tap water purifier (TWP) up to the RO unit as well. Kind of kludgy but it works and is relatively inexpensive.

DgenR8
01/11/2003, 10:24 AM
When it was time for me to change my cartridges on my 4 stage RO/DI, I went to www.aquaticReefSystems.com I got all new replacements for my 4 stage and added a 5th stage, a second DI chamber, not to mention a few odds and ends that they threw in just 'cuz I'm a member of RC! They're good folks, and sell good stuff. I forget what the price was on the second DI chamber, but overall, I got a lot of stuff, and didn't feel like I overpayed.

antfarm2000
01/11/2003, 04:20 PM
Will the RO alone be able to remove most of the Phosphates?

DgenR8
01/11/2003, 07:43 PM
Originally posted by antfarm2000
Will the RO alone be able to remove most of the Phosphates?
I don't think so, I believe the DI is what removes phosphate. I may be wrong, but I don't think so.

Mandoman
01/11/2003, 08:04 PM
dgenr8 is right..

The RO will purify water down to a few dozen ppm of dissolved solids. It's not really thorough on silicates and phosphates, so you will want to follow it with a DI cartridge. This should bring the TDS(total dissloved solids) down to less than 5.0 and maybe zero!