Is this UV sterilizer saltwater safe??

[edat]

It is an "Aquafine Ultaviolet Disinfection Unit Model DW 5"
It was used on a retail freshwater display made by the MARS company.
It has a stainless steel treatment chamber not plastic.

Info from manufacturer.........

Flow Capacity: 5 GPM
Clear Fresh Water: 1.13 m3/hr
No. of UV Lamps: 1
UV Dosage Seconds / cm2: >30,000
Maximum Operating Pressure: 120 psig (8.3 bar)
Test Pressure: 180 psig (12.4 bar)
Pressure Drop: <2psig (<0.14 bar)
Water Temperature Range: 35 degrees F to 100 degrees F (2 degrees C to 38 degrees C)
Ambient Temperature Range: 33 degrees F to 110 degrees F (1 degrees C to 43 degrees C)
Chamber Material: 316L SS
Cabinet Material: 304 SS
Inlet/Outlet Size: 1/2" Male NPT
Drain Port: N/A
Total Current @ 120 (240) VAC: .40 Amps (.20)
Total Power @ 120 (240) VAC: 48 Watts(47)
Power Requirements: 120VAC/60Hz/1ph or 240VAC/50Hz/1ph
UV Lamp LED Visual Verification Lamp is "ON": Standard
Overall Dimensions (L x W x H) Inches (cm): 18 x 4.3 x 6.5 (45 x 11 x 30)
Shipping Weight: 18 lbs (8 kg)
Shipping Size: 1.1 ft3(.03 m3)

[bertoni]

I wouldn't use it without checking the manufacturer's recommendations. Many types of stainless steel will corrode in saltwater.

[edat]

Thanks for the response.
I checked the manufacturer's recommendations and there is no mention of it being used for saltwater....but i thought that the Chamber Material: 316L SS was OK for saltwater.
Any help from anyone with an answer either way would be appreciated.

[edat]

Anyone have any info on this UV sterilizer??