anybody have a spare 65?

[syrinx]

Looking to get a 65 gallon (36x18) if anyone has one they need shed of. Drilled or not is fine, but needs to be of decent quality.

[medic29]

I've got an Oceanic 58 with that same foot print. I even have a stand too. Let me know.

[syrinx]

As I recall from when I was an oceanic dealer, the 58 has a slightly larger footprint than the AGA- the stand I am using is tight on the AGA, so that would preclude the oceanic. Of course if things have changed and they are now the same i would be interested in specifics! Thanks!

[medic29]

That is the dimensions of the stand I made for it. Generically, this is what I remember. Are you wanting exactly 18" x 36" from edge of molding to molding?

[syrinx]

I just recalled the oceanic as 1/2 inch bigger on both sides 36.5x 18.5. the AGA is 36 1/8th. That is the max width I have. Obviously i have the skills to make a mod or do a diffrent stand- just not the desire! Just want to replace scratched tank.

[medic29]

I understand!!! believe me. I'm not planning on making another stand for a while. I've made 3 in 18 months!! I'll measure the tank this evening when I get home. I think you are right, I think the total length of the tank and molding is 36.5"x18.5". This is because the molding is thicker on the Oceanic tank, than the AGA. You're welcome to the stand if you want. I have no need for it.

I'll get back with you.

[syrinx]

Thanks Rick. You have established yourself here as one of the most willing to be helpful.

[epon]

agreed :thumbsup:

[medic29]

syrinx I did get the tank measured and it is 36.5x18.5x20.75. Like I said above, you're welcome to the stand as well. I have no use for it.

LMK