View Full Version : Return Pump help
J Castellano
03/22/2007, 05:56 PM
I have a 90 gal upstairs and am putting an 100 gal sump in the base ment. Which will give me about a 9 ft head loss. What size pump do you guys/gals recommend??
Thanks,
Justin Castellano
J Castellano
03/23/2007, 08:01 AM
Can anyone help me???
mseferowicz
03/23/2007, 08:14 AM
Check out the head loss calculator on RC
http://www.reefcentral.com/calc/hlc2.php
Your best bet is getting something that will provide more flow then you need and have a ball valve to fine tune the flow.
My sump is in the basement as well, about 14' and I use a MAG36 to get around 500gph.
Good luck.
wife no likey
03/23/2007, 08:17 AM
with a 100g sump, I would shoot for about 400gph or so.
I would probably use an Iwaki md-30rlt. You will also be losing some throughput from the pipe itself and any elbows, etc.
Pete
J Castellano
03/23/2007, 02:26 PM
I was looking at a mag 24. Do you think this may suffice or am I better off going with an external pump??
sjm817
03/23/2007, 02:28 PM
Mags are not pressure pumps. You are better off with an external.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.