Tunze Owners

[gixxer600]

Just received my Tunze's. 2 6000 with multicontroller. It is replacing 2 Seio 1500. The Seios did its job but I wanted to simulate a back and forth motion in my tank. Just wondering what setting people are using. My tank is 125g(6ft). My return is a Gen X PCX40 connected to a Ocean Motions Squirt 2way. I have each outlet in the corner of the tank. Right now I have the stream on the opposite end of the side glass. Pointing toward the back middle.

[fishysteve]

You are going to have to try different positions to get the desired effect. It depends how your rockwork is arranged, and where the existing flow already is.

[stixx]

Just received my Tunze's. 2 6000 with multicontroller.

Any chance you can take pics? I am cusrious how large the Tunze's are in relation to a 125g tank (which is what I have also).

[gixxer600]

Sorry no pics.

[mdt178]

I'd try "Interval 2" in 60 seconds intervals and see if you like it. Set the lower knobs to 30% and the upper knobs to 100%. One pump (A)would pulse from 30%-100% while the other pump (B) stayed at 30%. After 60 seconds, B would go from 30-100% and A came down to 30%.