concept3
01/22/2007, 01:05 AM
Most of the stuff is less than 2 years old. It will be 2 years in March
$1,000 for everything!
Custom designed hood with parallel reflectors and 4 Fans
I just took out the Icecap ballasts to use in the new tank, I have left the halide reflectors and VHO setup intact.
http://reefcentral.com/gallery/data/500/83078actinic_test_fit.jpg
http://home.comcast.net/~swerve001/wsb/media/920694/site1052.JPG
Custom stand, way overbuilt, huge opening up front for sump access. It can hold up to a standard 90 gallon. Measures about 33" inches tall by 50" wide X 20" deep, will accomodate tanks with a 48" X 18" footprint. Doors have handles and nice hinges. Also on the doors are wire racks for supplements, food, test kits, etc. The racks are plastic covered wire to prevent rust.
Painted inside with 5 coats of epoxy, sealed completely before painting with 3 tubes of 100% silicone. Stand is COMPLETELY water tight. See pics below.
http://reefcentral.com/gallery/data/500/83078P6220136.JPG
http://www.njreefers.org/gallery/albums/userpics/10198/sump-flood-6-8.jpg
GFI electrical system in the stand, and surge protectors mounted up high to prevent water shocks. Also in the stand is a commercial grade driveway light with photosensor, so when lights in the tank turns on, it turns off (works better if you have barebottom), will throw in the two heavy duty manual electronic timers (one for the VHO's, one for the moonlights)
http://reefcentral.com/gallery/data/500/83078elctrical_box.jpg
http://reefcentral.com/gallery/data/500/83078electrical_box_location.jpg
AGA 75 gallon RR tank, minute scratches at bottom of tank from cleaning, otherwise 99.5% perfect. "widened" overflow teeth to accomodate more flow. Dual dursos for return. Back was not painted, I use a black backdrop. Included with tank.
http://reefcentral.com/gallery/data/500/83078P4230330.JPG
http://reefcentral.com/gallery/data/500/83078Overflow_modification.jpg
Return manifold with 6 locline returns for flow (4 with valves). Has completely breakable tubing for total maintainance. Ball valves everywhere for complete water control. There is also a 1" clear PVC checkvalve to prevent back siphoning. Part of the return pipe is a ball valve for a pressure feed for an accessory. This was my return line to my frag tank.
http://reefcentral.com/gallery/data/500/83078chec_valve_on_pump.jpg
http://reefcentral.com/gallery/data/500/83078tank_water_test.jpg
$1,000 for everything!
Custom designed hood with parallel reflectors and 4 Fans
I just took out the Icecap ballasts to use in the new tank, I have left the halide reflectors and VHO setup intact.
http://reefcentral.com/gallery/data/500/83078actinic_test_fit.jpg
http://home.comcast.net/~swerve001/wsb/media/920694/site1052.JPG
Custom stand, way overbuilt, huge opening up front for sump access. It can hold up to a standard 90 gallon. Measures about 33" inches tall by 50" wide X 20" deep, will accomodate tanks with a 48" X 18" footprint. Doors have handles and nice hinges. Also on the doors are wire racks for supplements, food, test kits, etc. The racks are plastic covered wire to prevent rust.
Painted inside with 5 coats of epoxy, sealed completely before painting with 3 tubes of 100% silicone. Stand is COMPLETELY water tight. See pics below.
http://reefcentral.com/gallery/data/500/83078P6220136.JPG
http://www.njreefers.org/gallery/albums/userpics/10198/sump-flood-6-8.jpg
GFI electrical system in the stand, and surge protectors mounted up high to prevent water shocks. Also in the stand is a commercial grade driveway light with photosensor, so when lights in the tank turns on, it turns off (works better if you have barebottom), will throw in the two heavy duty manual electronic timers (one for the VHO's, one for the moonlights)
http://reefcentral.com/gallery/data/500/83078elctrical_box.jpg
http://reefcentral.com/gallery/data/500/83078electrical_box_location.jpg
AGA 75 gallon RR tank, minute scratches at bottom of tank from cleaning, otherwise 99.5% perfect. "widened" overflow teeth to accomodate more flow. Dual dursos for return. Back was not painted, I use a black backdrop. Included with tank.
http://reefcentral.com/gallery/data/500/83078P4230330.JPG
http://reefcentral.com/gallery/data/500/83078Overflow_modification.jpg
Return manifold with 6 locline returns for flow (4 with valves). Has completely breakable tubing for total maintainance. Ball valves everywhere for complete water control. There is also a 1" clear PVC checkvalve to prevent back siphoning. Part of the return pipe is a ball valve for a pressure feed for an accessory. This was my return line to my frag tank.
http://reefcentral.com/gallery/data/500/83078chec_valve_on_pump.jpg
http://reefcentral.com/gallery/data/500/83078tank_water_test.jpg