|
#1
|
|||
|
|||
225g BB Reef Project!!!
Hey Everyone,
I am currently in the process of putting a 225g (84"x26"x24") Reef tank together. The tank will have a starfire front panel and bare bottom. It will sit on a 2"x2" tubular steel stand. Circulation: Will be provide by Pan World 200PS (1750 gph), Sequence 1000 (4300 gph) close loop Filteration: 45g sump, 37" Tall - 8" dia Geo Reef Needle Wheel Skimmer, etc... Supplements: Korallin 1502 Calcium Reactor, ReefMania Kalk Reactor, Phosban Reactor Lighting: 3 x 250w DE Setup, 7' T5 blue supplements. Here is a pic of the steel stand (84.5"x26.5"x36"):
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#2
|
|||
|
|||
Here is my GeoReef Needle Wheel Protein Skimmer. It is 37" tall, 8" dia and runs off of 2 x Sedra 9000 recirulating pumps!!! I hope it is enough for my tank.. I got a great deal on it from a reefer in Ohio.
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#3
|
|||
|
|||
looks sweet buddy!!
keep posting pics as the stuff comes along!!1 so waht happend to the 75gal???? later Lunchbucket
__________________
Trying to lose weight by walking is like trying to bake a cake w/ a cigarette lighter - Lunchbucket - "Nancy-Boy Extraordinaire" - maxxII- |
#4
|
|||
|
|||
Looks great Nate!
__________________
Somebody once said that if you put an infinite number of monkeys at an infinite number of typewriters, eventually you'd end up with the complete works of Shakespeare. My other computer is your MAC. |
#5
|
|||
|
|||
Well.. I broke down the 75g and sold it last week. I really didn't want to take care of 2 tanks..
Here are some pics of the tank after me and 5 of my reef club friends moved the tank in. Quote:
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#6
|
|||
|
|||
Thanks..
Quote:
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#7
|
|||
|
|||
And I thought the stand for my 375 was overbuilt using 1.5" tube! That thing is a beast and should hold 4 tanks that size- you used tons of bracing!. I noticed you also put cross braces in the bottom section of the stand as well- What was your reasoning for that? I didn't see a reason for cross braces on the bottom of my stand but am curious of why you did- maybe a wood floor or a basement underneath and it provides more even load distribution? Mine sits on 6" concrete so I wasn't too worried about that.
Looks like you powdercoated your stand as well- good choice. Looks to be an awesome project and keep the pics coming.
__________________
Scott |
#8
|
|||
|
|||
Scott.. Thanks...
Yeah.. I decide to just over engineer the stand. I wanted the stand to hold up to anything. The braces where suppose to be smaller ,but there was extra steel left over and the guy building the stand just decided to use it all. But now when I look back, I would of put less bracing, because they sometimes get in the way of plumbing. Actually my tank sits on a 4" or 6" stab also. Yep.. got the stand powder coated. I didn't want to deal with the stand rusting. Quote:
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#9
|
|||
|
|||
that stand is HOT! keep the pics coming... who's the manufacturer of that tank?
__________________
GO DUKE !! |
#10
|
|||
|
|||
Wow - you could park a house on that stand. Nice. Mine is also 2 inch x 2 inch steel - what guage did you go with? Mine is 1/8th inch.
I like that you aren't going crazy with sump flow/turnover (looks like about 8ish times/hour). Plenty to feed your ginormous skimmer. What size and how many holes do you have in your overflow? How big are your closed loop intake/return? I hope you'll go with schedule 80 bulkheads! That is a beautiful tank as well. Congrats! John
__________________
John |
#11
|
|||
|
|||
more pics,more pics,more pics!!!!!
|
#12
|
|||
|
|||
Thanks...
Tank is made by Aquariums for You.. Quote:
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#13
|
|||
|
|||
The stand is made of 1/8" thick steel also.. Little cheaper than 1/4" and I really didn't need it.
Well the return pump is an PanWorld 200PS.. (1750 gph with a max head of 39'). The pump feeds the skimmer and 2 x penductors. So I am pushing about 1000 gph thru my penductors and with the head pressure the pumps creates. The penductors turn the 1000gph into 5000gph (just with the return pump I am getting about 23x turn over.) But only 1000gph goes thru the sump.. No loud splashing noise. Actually using SCH 40 bulkheads, because AFY didn't have slightly larger diamond hole saws for the SCH bulkheads. The overflows have 1.5" drains and 1" returns.. The close loop pump is fed by 2" bulkhead and goes to 2 x 1.5" bulkheads in the back. Quote:
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#14
|
|||
|
|||
Another pic of the tank.. You can see where the bulkheads are placed..
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#15
|
|||
|
|||
Since the tank is going to be BB.. Here is the starboard cut the fit the bottom of the tank..
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#16
|
|||
|
|||
Here is a pic of the bottom of the stand..
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#17
|
|||
|
|||
Looks great! Do you think the Korallin 1502 will be enough to keep up with the demands of a 225 (assuming you are going SPS?)? I am running one on our 180 and had to add a PM secondary reaction chamber to help maintain 400+ calc.
Best of luck and keep the pics coming.
__________________
Chap |
#18
|
|||
|
|||
Thanks.. Jason..
Well I am also using a Kalk Reactor on my top off system. And I am planning on making a DIY second chamber.. Quote:
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#19
|
|||
|
|||
Well it has been a while since I have posted a update..
Here is my closed loop setup with a Sequence 4300SQ20
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#20
|
|||
|
|||
I have a tendency of laying out all my LR before starting aquascaping.
Here is a pic of all my LR layed out and ready to go into the tank..
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#21
|
|||
|
|||
Most of the LR is from Fiji.
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#22
|
|||
|
|||
Where are the aquascaping result pictures at?
__________________
I used to be indecisive. Now I'm not sure. |
#23
|
|||
|
|||
Here are the aquascaping pics..
I decided to use 2 x milk crates to raise the rock wall to allow more room in the back of the tank and also less LR was needed. Tank full of rocks and halfway filled.. Tanked filled and ready to plumb in the sump..
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#24
|
|||
|
|||
Here is a pic of where both 1.5" drain pvc met at a 2" Tee to the sump..
Here is a pic of the Penductor plumbed in.
__________________
"If at first the idea is not absurd, then there is no hope for it." - Albert Einstein |
#25
|
|||
|
|||
I like the Milk Crate idea.
Looks great.
__________________
"Are you guys ready?" "Let's roll." |
|
|