|
|
|
|
#1
12/03/2007, 12:42 AM
|
|||
|
|||
|
Steel Tank Stand
I've got a 220gal tank and am looking to get a steel tank stand for strength and room underneath. What do you suggest I get it coated with? Krylon/Rustoleum or some other stronger coating? If so, what do you guys suggest?
Thanks, Doug |
|
#2
12/03/2007, 01:48 AM
|
|||
|
|||
|
You could coat it with POR-15 its a ceramic based coating that when properly applied has the characteristics of powder coating. Do a search on the web for it and go to there home page. I used it on my 300 stand. I also use it when I put in a new patch panel on a car repair it has never failed me on a seam joint for rust throughs. Awesome stuff runs about 30 to 40 a quart.
Good luck Mike
__________________
The cost of live rock.5.99lb The cost of a custom 300 gal wall install.10k The look on your wifes face when she forgets the tank window is up and she's on display to the neighborhood..PRICELESS |
|
#3
12/03/2007, 01:51 PM
|
|||
|
|||
|
A number of poeple have used DIY truck bed liner "paint" and that seems like a good idea to me.
__________________
You cannot use reason to change the opinion of a person that did not use reason to form their opinion in the first place. |
|
#6
12/06/2007, 11:10 PM
|
|||
|
|||
|
My stand for my 270 is powder coated, fantastic stuff.
__________________
Charter member of the Trial and Error Club, when that doesn't work ask the stupid question here on RC to get an intelligent answer. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
